Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.7-STABLE #1: Fri Dec 13 09:47:24 CET 2002
    root@laura.tsc.vpn.ision.net:/usr/src/sys/compile/SMP
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (498.49-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x673  Stepping = 3
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 268419072 (262128K bytes)
avail memory = 257847296 (251804K bytes)
Changing APIC ID for IO APIC #0 from 0 to 8 on chip
Programming 35 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  1, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  0, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  8, version: 0x00220011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc034b000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard
IOAPIC #0 intpin 31 -> irq 2
IOAPIC #0 intpin 30 -> irq 5
IOAPIC #0 intpin 29 -> irq 10
pci0: <PCI bus> on pcib0
sym0: <875> port 0x2000-0x20ff mem 0xc6fff000-0xc6ffffff,0xc6ffcf00-0xc6ffcfff irq 2 at device 6.0 on pci0
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym1: <875> port 0x2400-0x24ff mem 0xc6ffe000-0xc6ffefff,0xc6ffce00-0xc6ffceff irq 5 at device 6.1 on pci0
sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
tl0: <Compaq Netelligent 10/100 Proliant> port 0x2c00-0x2c0f mem 0xc6ffccf0-0xc6ffccff irq 10 at device 7.0 on pci0
tl0: Ethernet address: 00:50:8b:cc:f4:68
miibus0: <MII bus> on tl0
lxtphy0: <LXT970 10/100 media interface> on miibus0
lxtphy0:  100baseFX, 100baseFX-FDX, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tlphy0: <ThunderLAN 10baseT media interface> on miibus0
tlphy0:  10base2/BNC, 10base5/AUI
pci0: <ATI Mach64-GV graphics accelerator> at 8.0
pci0: <unknown card> (vendor=0x0e11, dev=0xa0f0) at 9.0 irq 13
isab0: <Intel 82371AB PCI to ISA bridge> at device 20.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf100-0xf10f at device 20.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 20.2 irq 0
piix0: <Intel 82371AB Power management controller> at device 20.3 on pci0
eisa0: <EISA bus> on motherboard
mainboard0: <CPQ0679 (System Board)> on eisa0 slot 0
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xe8000-0xedfff,0xee000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
ata0-slave: ATAPI identify retries exceeded
SMP: AP CPU #1 Launched!
acd0: CDROM <CD-224E> at ata0-master PIO4
Waiting 5 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da0 at sym0 bus 0 target 0 lun 0
da0: <COMPAQ BB00912301 B016> Fixed Direct Access SCSI-2 device 
da0: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled
da0: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C)
da1 at sym0 bus 0 target 1 lun 0
da1: <COMPAQ BB00912301 B016> Fixed Direct Access SCSI-2 device 
da1: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled
da1: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C)
tl0: promiscuous mode enabled
tl0: promiscuous mode disabled
tl0: tx underrun -- increasing tx threshold to 512 bytes
tl0: tx underrun -- increasing tx threshold to 768 bytes


===============================================================================

MPTable, version 2.0.15

-------------------------------------------------------------------------------

MP Floating Pointer Structure:

  location:			BIOS
  physical address:		0x000f4ff0
  signature:			'_MP_'
  length:			16 bytes
  version:			1.4
  checksum:			0xc7
  mode:				Virtual Wire

-------------------------------------------------------------------------------

MP Config Table Header:

  physical address:		0x000f2b9f
  signature:			'PCMP'
  base table length:		396
  version:			1.4
  checksum:			0xb5
  OEM ID:			'COMPAQ  '
  Product ID:			'PROLIANT    '
  OEM table pointer:		0x00000000
  OEM table size:		0
  entry count:			41
  local APIC address:		0xfee00000
  extended table length:	76
  extended table checksum:	86

-------------------------------------------------------------------------------

MP Config Base Table Entries:

--
Processors:	APIC ID	Version	State		Family	Model	Step	Flags
		 1	 0x10	 BSP, usable	 6	 7	 3	 0x383fbff
		 0	 0x10	 AP, usable	 6	 7	 3	 0x383fbff
--
Bus:		Bus ID	Type
		 0	 PCI   
		 9	 ISA   
--
I/O APICs:	APIC ID	Version	State		Address
		 8	 0x11	 usable		 0xfec00000
--
I/O Ints:	Type	Polarity    Trigger	Bus ID	 IRQ	APIC ID	PIN#
		INT	active-lo       level	     0	13:A	      8	  17
		INT	active-lo       level	     0	13:B	      8	  16
		INT	active-lo       level	     0	13:C	      8	  17
		INT	active-lo       level	     0	13:D	      8	  16
		INT	active-lo       level	     0	15:A	      8	  19
		INT	active-lo       level	     0	15:B	      8	  18
		INT	active-lo       level	     0	15:C	      8	  19
		INT	active-lo       level	     0	15:D	      8	  18
		INT	active-lo       level	     0	16:A	      8	  21
		INT	active-lo       level	     0	16:B	      8	  20
		INT	active-lo       level	     0	16:C	      8	  21
		INT	active-lo       level	     0	16:D	      8	  20
		INT	active-lo       level	     0	18:A	      8	  23
		INT	active-lo       level	     0	18:B	      8	  22
		INT	active-lo       level	     0	18:C	      8	  23
		INT	active-lo       level	     0	18:D	      8	  22
		INT	active-lo       level	     0	 6:A	      8	  31
		INT	active-lo       level	     0	 6:B	      8	  30
		INT	active-lo       level	     0	 7:A	      8	  29
		INT	active-lo       level	     0	 8:A	      8	  28
		INT	active-lo        edge	     0	 9:A	      8	  13
		INT	active-hi        edge	     9	   1	      8	   1
		INT	active-hi        edge	     9	   0	      8	   2
		INT	active-hi        edge	     9	   3	      8	   3
		INT	active-hi        edge	     9	   4	      8	   4
		INT	active-hi        edge	     9	   6	      8	   6
		INT	active-hi        edge	     9	   7	      8	   7
		INT	active-hi        edge	     9	   8	      8	   8
		INT	active-hi       level	     9	   9	      8	   9
		INT	active-hi        edge	     9	  12	      8	  12
		INT	active-lo        edge	     9	  13	      8	  13
		INT	active-hi        edge	     9	  14	      8	  14
		INT	active-hi        edge	     9	  15	      8	  15
--
Local Ints:	Type	Polarity    Trigger	Bus ID	 IRQ	APIC ID	PIN#
		ExtINT	 conforms    conforms	     9	   0	    255	   0
		NMI	 conforms    conforms	     9	   0	    255	   1

-------------------------------------------------------------------------------

MP Config Extended Table Entries:

Extended Table HOSED!