Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE-p2 #2: Sat Dec 11 18:49:23 CET 2004
    root@columbus.lokal.lan:/usr/obj/usr/src/sys/COLUMBUS
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (799.62-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x683  Stepping = 3
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 536870912 (512 MB)
avail memory = 519897088 (495 MB)
MPTable: <AMI      CNB30LE     >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Assuming intbase of 0
ioapic1: Assuming intbase of 16
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
atapci0: <Promise PDC20268 UDMA100 controller> port 0x9400-0x940f,0x9800-0x9803,0xa000-0xa007,0xa400-0xa403,0xa800-0xa807 mem 0xfe9e0000-0xfe9e3fff irq 16 at device 1.0 on pci0
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
atapci1: <Promise PDC20268 UDMA100 controller> port 0xb400-0xb40f,0xb800-0xb803,0xc000-0xc007,0xc400-0xc403,0xc800-0xc807 mem 0xfe9ec000-0xfe9effff irq 18 at device 2.0 on pci0
ata4: channel #0 on atapci1
ata5: channel #1 on atapci1
pci0: <display, VGA> at device 4.0 (no driver attached)
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xb000-0xb03f mem 0xfe800000-0xfe8fffff,0xfe9e6000-0xfe9e6fff irq 31 at device 6.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:30:48:21:74:63
isab0: <PCI-ISA bridge> port 0x580-0x58f at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci2: <ServerWorks ROSB4 UDMA33 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0
ata0: channel #0 on atapci2
ata1: channel #1 on atapci2
pci0: <serial bus, USB> at device 15.2 (no driver attached)
pcib1: <MPTable Host-PCI bridge> pcibus 1 on motherboard
pci1: <PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0xe400-0xe43f mem 0xfeb40000-0xfeb7ffff,0xfeba0000-0xfebbffff irq 24 at device 1.0 on pci1
em0: Ethernet address: 00:0e:0c:2c:13:de
em0:  Speed:N/A  Duplex:N/A
ahc0: <Adaptec aic7892 Ultra160 SCSI adapter> port 0xe800-0xe8ff mem 0xfebff000-0xfebfffff irq 28 at device 3.0 on pci1
ahc0: [GIANT-LOCKED]
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
cpu0 on motherboard
cpu1 on motherboard
orm0: <ISA Option ROMs> at iomem 0xc8000-0xca7ff,0xc0000-0xc7fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
pcf0: can't reserve irq, polled mode.
pcf0: <PCF8584 I2C bus controller> at port 0x61-0x62 on isa0
iicbus0: <Philips I2C bus> on pcf0 addr 0xaa
ic0 on iicbus0
iic0: <I2C generic I/O> on iicbus0
iicsmb0: <SMBus over I2C bridge> on iicbus0
smbus0: <System Management Bus> on iicsmb0
smb0: <SMBus generic I/O> on smbus0
unknown: <PNP0c02> can't assign resources (port)
pcf1: cannot reserve I/O port range
Timecounters tick every 10.000 msec
acd0: DVDR <HL-DT-ST DVDRAM GSA-4040B/A302> at ata0-master UDMA33
ad0: 190782MB <WDC WD2000JB-16FUA0/15.05R15> [387621/16/63] at ata2-master UDMA100
ad1: 190782MB <WDC WD2000JB-32EVA0/15.05R15> [387621/16/63] at ata3-master UDMA100
ad2: 190782MB <WDC WD2000JB-00GVA0/08.02D08> [387621/16/63] at ata4-master UDMA100
ad3: 190782MB <WDC WD2000JB-00GVA0/08.02D08> [387621/16/63] at ata5-master UDMA100
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM IC35L036UWDY10-0 S28C> Fixed Direct Access SCSI-3 device 
da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da0: 34715MB (71096640 512 byte sectors: 255H 63S/T 4425C)
SMP: AP CPU #1 Launched!
cd0 at ata0 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GSA-4040B A302> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/da0s1a
ohci0: <OHCI (generic) USB controller> mem 0xfe9e7000-0xfe9e7fff irq 10 at device 15.2 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered