Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE-p9 #0: Tue Aug  3 23:11:16 EDT 2004
    user@host.example.com:/usr/src/sys/i386/compile/EXAMPLE
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0838000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08382e4.
ACPI APIC Table: <PTLTD          APIC  >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2399.33-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf25  Stepping = 5
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Hyperthreading: 2 logical CPUs
real memory  = 536346624 (511 MB)
avail memory = 511365120 (487 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  6
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
ioapic3 <Version 2.0> irqs 72-95 on motherboard
ioapic4 <Version 2.0> irqs 96-119 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD    RSDT  > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 29 entries at 0xc00fddf0
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_cpu2: <CPU> on acpi0
device_probe_and_attach: acpi_cpu2 attach returned 6
acpi_cpu2: <CPU> on acpi0
device_probe_and_attach: acpi_cpu2 attach returned 6
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <unknown> at device 0.1 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.HLB_ -AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: <base peripheral, interrupt controller> at device 28.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 29.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pci1: <base peripheral, interrupt controller> at device 30.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 31.0 on pci1
pci3: <ACPI PCI bus> on pcib3
aac0: <Adaptec SCSI RAID 2200S> mem 0xf8000000-0xfbffffff irq 24 at device 1.0 on pci3
aac0: [MPSAFE]
aac0: i960RX 100MHz, 48MB cache memory, optional battery present
aac0: Kernel 4.0-0, Build 6003, S/N b8591a
aac0: Supported Options=1f7e<CLUSTERS,WCACHE,DATA64,HOSTTIME,RAID50,WINDOW4GB,SOFTERR,NORECOND,SGMAP64,ALARM,NONDASD>
aacp0: <SCSI Passthrough Bus> on aac0
aacp1: <SCSI Passthrough Bus> on aac0
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port 0x3000-0x303f mem 0xf4200000-0xf421ffff irq 28 at device 2.0 on pci3
em0:  Speed:N/A  Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port 0x3040-0x307f mem 0xf4220000-0xf423ffff irq 29 at device 2.1 on pci3
em1:  Speed:N/A  Duplex:N/A
pcib4: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pcib4: could not get PCI interrupt routing table for \\_SB_.PCI0.HLC_ -AE_NOT_FOUND
pci4: <ACPI PCI bus> on pcib4
pci4: <base peripheral, interrupt controller> at device 28.0 (no driver attached)
pcib5: <ACPI PCI-PCI bridge> at device 29.0 on pci4
pci5: <ACPI PCI bus> on pcib5
pci4: <base peripheral, interrupt controller> at device 30.0 (no driver attached)
pcib6: <ACPI PCI-PCI bridge> at device 31.0 on pci4
pci6: <ACPI PCI bus> on pcib6
ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x4000-0x40ff,0x4400-0x44ff mem 0xf4400000-0xf4401fff irq 76 at device 2.0 on pci6
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x4800-0x48ff,0x4c00-0x4cff mem 0xf4402000-0xf4403fff irq 77 at device 2.1 on pci6
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x2000-0x201f irq 16 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x2020-0x203f irq 19 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x2040-0x205f irq 18 at device 29.2 on pci0
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci7: <ACPI PCI bus> on pcib7
pci7: <display, VGA> at device 1.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port 0x2060-0x206f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acpi_cpu2: <CPU> on acpi0
device_probe_and_attach: acpi_cpu2 attach returned 6
acpi_cpu2: <CPU> on acpi0
device_probe_and_attach: acpi_cpu2 attach returned 6
orm0: <Option ROMs> at iomem 0xe0000-0xe3fff,0xc9000-0xccfff,0xc8000-0xc8fff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acd0: CDROM <MATSHITA CR-177> at ata1-master PIO4
Waiting 15 seconds for SCSI devices to settle
aacd0: <Passthrough> on aac0
aacd0: 70007MB (143374744 sectors)
GEOM: create disk aacd0 dp=0xc49d958c
aacd1: <RAID 5> on aac0
aacd1: 104996MB (215032320 sectors)
GEOM: create disk aacd1 dp=0xc49d948c
ses0 at aacp0 bus 0 target 6 lun 0
ses0: <SUPER GEM318 0> Fixed unknown SCSI-2 device
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
pass0 at aacp0 bus 0 target 0 lun 0
pass0: <SEAGATE ST373453LC 0006> Fixed unknown SCSI-3 device
pass0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit)
pass1 at aacp0 bus 0 target 1 lun 0
pass1: <SEAGATE ST336753LC 0005> Fixed unknown SCSI-3 device
pass1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit)
pass2 at aacp0 bus 0 target 2 lun 0
pass2: <SEAGATE ST336753LC 0005> Fixed unknown SCSI-3 device
pass2: 160.000MB/s transfers (80.000MHz, offset 63, 16bit)
pass3 at aacp0 bus 0 target 3 lun 0
pass3: <SEAGATE ST336753LC 0006> Fixed unknown SCSI-3 device
pass3: 160.000MB/s transfers (80.000MHz, offset 63, 16bit)
pass4 at aacp0 bus 0 target 4 lun 0
pass4: <SEAGATE ST336753LC 0005> Fixed unknown SCSI-3 device
pass4: 160.000MB/s transfers (80.000MHz, offset 63, 16bit)
pass5 at aacp0 bus 0 target 5 lun 0
pass5: <SEAGATE ST336753LC 0005> Fixed unknown SCSI-3 device
pass5: 160.000MB/s transfers (80.000MHz, offset 63, 16bit)
SMP: AP CPU #1 Launched!