Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.1-RELEASE-p17 #0: Sat Jun  5 18:09:24 EDT 2004
    admin@angler.jiafu.homedns.org:/usr/obj/usr/src/sys/SMP-ANGLER
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0780000.
Preloaded elf module "/boot/kernel/vesa.ko" at 0xc07802bc.
Preloaded elf module "/boot/kernel/linprocfs.ko" at 0xc0780368.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc0780418.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07804c4.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 2399328156 Hz
CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2399.33-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Hyperthreading: 2 logical CPUs
real memory  = 1073152000 (1023 MB)
avail memory = 1034514432 (986 MB)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 24 pins in IOAPIC #1
Programming 24 pins in IOAPIC #2
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): apic id:  0, version: 0x00050014, at 0xfee00000
 cpu1 (AP):  apic id:  1, version: 0x00050014, at 0xfee00000
 cpu2 (AP):  apic id:  6, version: 0x00050014, at 0xfee00000
 cpu3 (AP):  apic id:  7, version: 0x00050014, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00178020, at 0xfec00000
 io1 (APIC): apic id:  3, version: 0x00178020, at 0xfec80000
 io2 (APIC): apic id:  4, version: 0x00178020, at 0xfec80100
Pentium Pro MTRR support enabled
VESA: v3.0, 131072k memory, flags:0x1, mode table:0xc070dc02 (1000022)
VESA: NVidia
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD    RSDT  > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 23 entries at 0xc00fde50
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_cpu1: <CPU> port 0x530-0x537 on acpi0
acpi_cpu2: <CPU> port 0x530-0x537 on acpi0
acpi_cpu3: <CPU> port 0x530-0x537 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
IOAPIC #0 intpin 16 -> irq 2
IOAPIC #0 intpin 19 -> irq 3
IOAPIC #0 intpin 18 -> irq 5
IOAPIC #0 intpin 23 -> irq 10
IOAPIC #0 intpin 17 -> irq 11
agp0: <Intel Generic host to PCI bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0
pci0: <unknown> at device 0.1 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> mem 0xe8000000-0xefffffff at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pcib2: could not get PCI interrupt routing table for \\_SB_.PCI0.HLB_ - AE_NOT_FOUND
pci2: <ACPI PCI bus> on pcib2
pci2: <base peripheral, interrupt controller> at device 28.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 29.0 on pci2
pci3: <ACPI PCI bus> on pcib3
IOAPIC #1 intpin 0 -> irq 16
atapci0: <Promise PDC20619 UDMA133 controller> port 0x2000-0x207f,0x2400-0x240f,0x2080-0x20ff mem 0xda100000-0xda11ffff,0xda120000-0xda120fff irq 16 at device 3.0 on pci3
ata2: at 0xda120000 on atapci0
ata3: at 0xda120000 on atapci0
ata4: at 0xda120000 on atapci0
ata5: at 0xda120000 on atapci0
pci2: <base peripheral, interrupt controller> at device 30.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 31.0 on pci2
pci4: <ACPI PCI bus> on pcib4
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1840-0x185f irq 2 at device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: NEC Corporation USB2.0 Hub Controller, class 9/0, rev 2.00/1.00, addr 2
uhub1: 4 ports with 4 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1860-0x187f irq 3 at device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1880-0x189f irq 5 at device 29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
IOAPIC #0 intpin 22 -> irq 17
pcm0: <Creative CT5880-C> port 0x3000-0x303f irq 17 at device 1.0 on pci5
pcm0: <SigmaTel STAC9721/23 AC97 Codec>
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xda200000-0xda203fff,0xda204000-0xda2047ff irq 11 at device 2.0 on pci5
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:e0:81:00:00:20:15:bf
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
if_fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:e0:81:20:15:bf
sbp0: <SBP2/SCSI over firewire> on firewire0
fwohci0: Initiate bus reset
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.5.31> port 0x3040-0x307f mem 0xda220000-0xda23ffff irq 2 at device 3.0 on pci5
em0:  Speed:100 Mbps  Duplex:Full
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH4 UDMA100 controller> port 0x18a0-0x18af,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata1: at 0x170 irq 15 on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm1: <Intel 82801DB (ICH4)> port 0x1800-0x183f,0x1400-0x14ff mem 0xd8000800-0xd80008ff,0xd8000c00-0xd8000dff irq 11 at device 31.5 on pci0
pcm1: <Analog Devices AD1981B AC97 Codec>
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <Option ROM> at iomem 0xe0000-0xe3fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
Timecounters tick every 10.000 msec
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ad4: 117246MB <Maxtor 6Y120P0> [238216/16/63] at ata2-master UDMA133
ad6: 117246MB <Maxtor 6Y120L0> [238216/16/63] at ata3-master UDMA133
ad8: 117246MB <Maxtor 6Y120L0> [238216/16/63] at ata4-master UDMA133
ad10: 117246MB <Maxtor 6Y120L0> [238216/16/63] at ata5-master UDMA133
acd0: DVD-R <GENERIC DVD DUAL 4XMax> at ata0-master PIO4
ar0: 232696MB <ATA RAID0+1 array> [29664/255/63] status: READY subdisks:
 disk0 READY on ad4 at ata2-master
 disk1 READY on ad6 at ata3-master
 disk2 READY on ad8 at ata4-master
 disk3 READY on ad10 at ata5-master
Opened disk ad4 -> 1
Opened disk ad4 -> 1
Opened disk ad4 -> 1
Opened disk ad4 -> 1
Opened disk ad4 -> 1
Opened disk ad4 -> 1
Opened disk ad4 -> 1
Opened disk ad4 -> 1
Opened disk ad4 -> 1
Opened disk ad4 -> 1
Opened disk ad4 -> 1
Opened disk ad4 -> 1
Opened disk ad4 -> 1
Opened disk ad6 -> 1
Opened disk ad6 -> 1
Opened disk ad8 -> 1
Opened disk ad8 -> 1
Opened disk ad10 -> 1
Opened disk ad10 -> 1
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Mounting root from ufs:/dev/ar0s4a
cd0 at ata0 bus 0 target 0 lun 0
cd0: <GENERIC DVD DUAL 4XMax 2.17> Removable CD-ROM SCSI-0 device 
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed