Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA1 #0: Sat Aug 21 08:19:34 UTC 2004
    root@mack.dcsl.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium III/Pentium III Xeon/Celeron (446.42-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x673  Stepping = 3
  Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory  = 268435456 (256 MB)
avail memory = 253034496 (241 MB)
MPTable: <FSCD1031 PRIMERGY    >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  1
 cpu1 (AP): APIC ID:  0
ioapic0: Assuming intbase of 0
ioapic0 <Version 1.1> irqs 0-31 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443GX host to PCI bridge> mem 0xf4000000-0xf7ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci0: <base peripheral> at device 2.0 (no driver attached)
pcib2: <MPTable PCI-PCI bridge> at device 3.0 on pci0
pci2: <PCI bus> on pcib2
pci2: <display, VGA> at device 0.0 (no driver attached)
sym0: <895> port 0x3000-0x30ff mem 0xf0200000-0xf0200fff,0xf0201000-0xf02010ff irq 23 at device 1.0 on pci2
sym0: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: [GIANT-LOCKED]
pcib3: <MPTable PCI-PCI bridge> at device 8.0 on pci2
pci3: <PCI bus> on pcib3
sf0: <Adaptec ANA-62022 10/100BaseTX> port 0x4000-0x40ff mem 0xf0300000-0xf037ffff irq 20 at device 4.0 on pci3
miibus0: <MII bus> on sf0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sf0: Ethernet address: 00:00:d1:d9:aa:4d
sf0: [GIANT-LOCKED]
sf1: <Adaptec ANA-62022 10/100BaseTX> port 0x4400-0x44ff mem 0xf0380000-0xf03fffff irq 21 at device 5.0 on pci3
miibus1: <MII bus> on sf1
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sf1: Ethernet address: 00:00:d1:d9:aa:4e
sf1: [GIANT-LOCKED]
pcib4: <MPTable PCI-PCI bridge> at device 10.0 on pci2
pci4: <PCI bus> on pcib4
pci4: <display, VGA> at device 0.0 (no driver attached)
pci0: <unknown> at device 4.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1c00-0x1c0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1400-0x141f irq 19 at device 7.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: Texas Instruments UT-USB41 hub, class 9/0, rev 1.00/1.00, addr 2
uhub1: 4 ports with 4 removable, bus powered
piix0: <PIIX Timecounter> port 0xf0b0-0xf0bf at device 7.3 on pci0
Timecounter "PIIX" frequency 3579545 Hz quality 0
sym1: <895> port 0x1800-0x18ff mem 0xf0101000-0xf0101fff,0xf0102000-0xf01020ff irq 17 at device 13.0 on pci0
sym1: Symbios NVRAM, ID 7, Fast-40, SE, parity checking
sym1: open drain IRQ line driver, using on-chip SRAM
sym1: using LOAD/STORE-based firmware.
sym1: [GIANT-LOCKED]
pci0: <multimedia, audio> at device 14.0 (no driver attached)
pci0: <input device> at device 14.1 (no driver attached)
cpu0 on motherboard
cpu1 on motherboard
orm0: <ISA Option ROMs> at iomem 0xc8800-0xcbfff,0xc0000-0xc87ff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model MouseMan+, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ahc0: No resources alloated.
ahc0: No resources alloated.
unknown: <PNP0303> can't assign resources (port)
ahc0: No resources alloated.
unknown: <PNP0c02> can't assign resources (port)
ahc0: No resources alloated.
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
Timecounters tick every 10.000 msec
Waiting 15 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
(noperiph:sym1:0:-1:-1): SCSI BUS reset delivered.
Interrupt storm detected on "irq14: ata0"; throttling interrupt source
Interrupt storm detected on "irq15: ata1"; throttling interrupt source
(noperiph:sym1:0:-1:-1): SCSI BUS mode change from SE to SE.
(probe7:sym0:0:8:0): phase change 6-7 6@0f35958c resid=4.
ses0 at sym0 bus 0 target 8 lun 0
ses0: <SIEMENS STM/L S1 4.1b> Fixed Processor SCSI-2 device 
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
da0 at sym0 bus 0 target 0 lun 0
da0: <MAXTOR ATLASU320_18_SCA B434> Fixed Direct Access SCSI-3 device 
da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da0: 17537MB (35916548 512 byte sectors: 255H 63S/T 2235C)
SMP: AP CPU #1 Launched!
cd0 at sym1 bus 0 target 4 lun 0
cd0: <PLEXTOR CD-R   PX-R412C 1.07> Removable CD-ROM SCSI-2 device 
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at sym1 bus 0 target 5 lun 0
cd1: <PLEXTOR CD-ROM PX-20TS 1.01> Removable CD-ROM SCSI-2 device 
cd1: 10.000MB/s transfers (10.000MHz, offset 15)
cd1: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/da0s1a
drm0: <Matrox G400/G450 (AGP)> mem 0xf0800000-0xf0ffffff,0xf0400000-0xf0403fff,0xfa000000-0xfbffffff irq 22 at device 0.0 on pci4
info: [drm] AGP at 0xf4000000 64MB
info: [drm] Initialized mga 3.1.0 20021029 on minor 0