Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #1: Tue Mar  2 02:38:32 EST 2004
    root@:/usr/obj/usr/src/sys/kernel
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff805cb000.
ACPI APIC Table: <VIAK8  AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Opteron(tm) Processor 244 (1804.11-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0xf58  Stepping = 8
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  AMD Features=0xe0500000<NX,MMX+,LM,3DNow!+,3DNow!>
real memory  = 1072627712 (1022 MB)
avail memory = 1026764800 (979 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 0.3> irqs 0-23 on motherboard
acpi0: <VIAK8 AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_cpu1: <CPU> port 0x530-0x537 on acpi0
acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: possible interrupts:  20
pcib0: slot 15 INTB routed to irq 20 via \\_SB_.PCI0.ALKA
pcib0: possible interrupts:  21
pcib0: slot 16 INTA routed to irq 21 via \\_SB_.PCI0.ALKB
pcib0: possible interrupts:  21
pcib0: slot 16 INTA routed to irq 21 via \\_SB_.PCI0.ALKB
pcib0: possible interrupts:  21
pcib0: slot 16 INTB routed to irq 21 via \\_SB_.PCI0.ALKB
pcib0: possible interrupts:  21
pcib0: slot 16 INTC routed to irq 21 via \\_SB_.PCI0.ALKB
pcib0: possible interrupts:  22
pcib0: slot 17 INTC routed to irq 22 via \\_SB_.PCI0.ALKC
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 16
pci1: <display, VGA> at device 0.0 (no driver attached)
pci1: <display> at device 0.1 (no driver attached)
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xb000-0xb03f mem 0xfb000000-0xfb0fffff,0xfb110000-0xfb110fff irq 19 at device 8.0 on pci0
fxp0: Ethernet address 00:d0:b7:ba:2f:ed
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bge0: <Broadcom BCM5705 Gigabit Ethernet, ASIC rev. 0x3003> mem 0xfb100000-0xfb10ffff irq 16 at device 11.0 on pci0
bge0: firmware handshake timed out
bge0: RX CPU self-diagnostics failed!
bge0: chip initialization failed
device_probe_and_attach: bge0 attach returned 6
atapci0: <VIA 8237 SATA150 controller> port 0xc800-0xc8ff,0xc400-0xc40f,0xc000-0xc003,0xbc00-0xbc07,0xb800-0xb803,0xb400-0xb407 irq 20 at device 15.0 on pci0
atapci0: [MPSAFE]
ata2: at 0xb400 on atapci0
ata2: [MPSAFE]
ata3: at 0xbc00 on atapci0
ata3: [MPSAFE]
atapci1: <VIA 8237 UDMA133 controller> port 0xcc00-0xcc0f at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci1
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 21 at device 16.0 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 21 at device 16.1 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 21 at device 16.2 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ukbd0: Logitech USB Receiver, rev 1.10/21.00, addr 2, iclass 3/1
kbd1 at ukbd0
ums0: Logitech USB Receiver, rev 1.10/21.00, addr 2, iclass 3/1
ums0: 7 buttons and Z dir.
pci0: <serial bus, USB> at device 16.4 (no driver attached)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pcm0: <VIA VT8233X> port 0xe000-0xe0ff irq 22 at device 17.5 on pci0
pcm0: <Avance Logic ALC200 AC97 Codec>
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
orm0: <Option ROMs> at iomem 0xd4000-0xd7fff,0xd2000-0xd3fff,0xd0000-0xd17ff,0xc0000-0xccfff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
device_probe_and_attach: atkbd0 attach returned 6
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
ad0: 8223MB <ST38410A> [16708/16/63] at ata0-master UDMA66
acd0: CDRW <LITE-ON DVDRW LDW-811S> at ata1-slave PIO4
ad4: 35304MB <WDC WD360GD-50GHA0> [71730/16/63] at ata2-master UDMA100
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/ad0s2a