Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2-RELEASE #1: Fri Jan 30 01:54:56 CET 2004
    root@greatsheep:/usr/src/sys/i386/compile/SUBMARINE_SMP
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a40000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a401f4.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (451.02-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x653  Stepping = 3
  Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 402653184 (384 MB)
avail memory = 381431808 (363 MB)
MPTable: <INTEL    440GX       >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Assuming intbase of 0
ioapic0 <Version 1.1> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
    ACPI-0159: *** Error: AcpiLoadTables: Could not get RSDP, AE_NO_ACPI_TABLES
    ACPI-0213: *** Error: AcpiLoadTables: Could not load tables: AE_NO_ACPI_TABLES
ACPI: table load failed: AE_NO_ACPI_TABLES
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
pcib0: <MPTable Host-PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib0: slot 14 INTA routed to irq 17
pcib0: slot 14 INTA routed to irq 17
pcib0: slot 15 INTA routed to irq 16
pcib0: slot 17 INTA routed to irq 18
pcib0: slot 19 INTA routed to irq 16
agp0: <Intel 82443GX host to PCI bridge> mem 0xfa000000-0xfbffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xffa0-0xffaf at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xef80-0xef9f at device 7.2 on pci0
pcib0: unable to route slot 7 INTD
uhci0: Could not allocate irq
device_probe_and_attach: uhci0 attach returned 6
piix0: <PIIX Timecounter> port 0x440-0x44f at device 7.3 on pci0
Timecounter "PIIX" frequency 3579545 Hz quality 0
ahc0: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0xe000-0xe0ff mem 0xfebfd000-0xfebfdfff irq 17 at device 14.0 on pci0
aic7896/97: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0xe400-0xe4ff mem 0xfebfe000-0xfebfefff irq 17 at device 14.1 on pci0
aic7896/97: Ultra2 Wide Channel B, SCSI Id=7, 32/253 SCBs
rl0: <RealTek 8139 10/100BaseTX> port 0xee00-0xeeff mem 0xfebfcf00-0xfebfcfff irq 16 at device 15.0 on pci0
rl0: Ethernet address: 00:e0:7d:9f:4b:6f
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <display, VGA> at device 16.0 (no driver attached)
pci0: <display, VGA> at device 17.0 (no driver attached)
vr0: <VIA VT6105 Rhine III 10/100BaseTX> port 0xed00-0xedff mem 0xfebfce00-0xfebfceff irq 16 at device 19.0 on pci0
vr0: Ethernet address: 00:e0:7d:f0:4e:3d
miibus1: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus1
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROMs> at iomem 0xc8000-0xcd7ff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
Timecounters tick every 10.000 msec
acd0: CDRW <_NEC DVD+RW ND-1100A> at ata0-master PIO4
GEOM: create disk ad2 dp=0xc3aed460
ad2: 8056MB <ST38421A> [16368/16/63] at ata1-master UDMA33
GEOM: create disk ad3 dp=0xc3aeda60
ad3: 57277MB <SAMSUNG SV0602H> [116374/16/63] at ata1-slave UDMA33
Waiting 15 seconds for SCSI devices to settle
GEOM: create disk da0 dp=0xc3b73850
SMP: AP CPU #1 Launched!
da0 at ahc1 bus 0 target 0 lun 0
da0: <FUJITSU MAG3182LC 5210> Fixed Direct Access SCSI-2 device 
da0: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0: 17429MB (35694860 512 byte sectors: 255H 63S/T 2221C)
Mounting root from ufs:/dev/ad2s1a