Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.1-RELEASE-p8 #6: Sun Oct  5 04:06:51 CEST 2003
    elessar@aragorn.starkstrom.lan:/usr/obj/usr/src/sys/ARAGORN
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0750000.
Preloaded elf module "/boot/kernel/ntfs.ko" at 0xc07501a4.
Preloaded elf module "/boot/modules/nvidia.ko" at 0xc0750250.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 1399539510 Hz
CPU: Intel(R) Pentium(R) III CPU family      1400MHz (1399.54-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 1073741824 (1024 MB)
avail memory = 1035313152 (987 MB)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): apic id:  0, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  1, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00178011, at 0xfec00000
Pentium Pro MTRR support enabled
VESA: v3.0, 65536k memory, flags:0x1, mode table:0xc04f0e42 (1000022)
VESA: NVidia
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00fdd20
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
IOAPIC #0 intpin 10 -> irq 2
IOAPIC #0 intpin 11 -> irq 10
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xf0000000-0xf3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
nvidia0: <GeForce2 GTS/GeForce2 Pro> mem 0xe8000000-0xefffffff,0xf4000000-0xf4ffffff irq 9 at device 0.0 on pci1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686B UDMA100 controller> port 0xd000-0xd00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 2 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 2 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.4 (no driver attached)
fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0xdc00-0xdc3f mem 0xf7800000-0xf78fffff,0xf7900000-0xf7900fff irq 5 at device 9.0 on pci0
fxp0: Ethernet address 00:90:27:8f:df:05
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib2: <PCI-PCI bridge> at device 10.0 on pci0
pci2: <PCI bus> on pcib2
mlx0: <Mylex version 4 RAID interface> mem 0xf7000000-0xf77fffff irq 2 at device 10.1 on pci0
mlx0: DAC960PTL1, 1 channel, firmware 4.08-0-33, 8MB RAM
mlxd0: <Mylex System Drive> on mlx0
mlxd0: 17430MB (35696640 sectors) RAID 5 (online)
pcm0: <Creative EMU10K1> port 0xe000-0xe01f irq 9 at device 11.0 on pci0
pcm0: <TriTech TR28602 AC97 Codec>
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xe800-0xe8ff mem 0xf7901000-0xf7901fff irq 10 at device 12.0 on pci0
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
orm0: <Option ROMs> at iomem 0xce000-0xd07ff,0xcc000-0xcd7ff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0400> can't assign resources (port)
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
Timecounters tick every 10.000 msec
IPsec: Initialized Security Association Processing.
ad0: 58644MB <Maxtor 5T060H6> [119150/16/63] at ata0-master UDMA100
ad3: 76319MB <WDC WD800JB-00CRA1> [155061/16/63] at ata1-slave UDMA100
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/mlxd0s2a
cd0 at ahc0 bus 0 target 3 lun 0
cd0: <PLEXTOR CD-ROM PX-40TS 1j13> Removable CD-ROM SCSI-2 device 
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
cd1 at ahc0 bus 0 target 6 lun 0
cd1: <PLEXTOR CD-R   PX-R820T 1.08> Removable CD-ROM SCSI-2 device 
cd1: 10.000MB/s transfers (10.000MHz, offset 8)
cd1: Attempt to query device size failed: NOT READY, Medium not present - tray closed