Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.6.2-RELEASE #0: Sat Oct  5 04:25:11 CEST 2002
    root@2xp200mmx.BI:/usr/src/sys/compile/2xp200mmx
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium/P55C (200.46-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x543  Stepping = 3
  Features=0x8003bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,MMX>
real memory  = 268435456 (262144K bytes)
config> en ed0
config> po ed0 0x320
config> ir ed0 11
config> iom ed0 0xd8000
config> f ed0 0
config> q
avail memory = 257019904 (250996K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  0, version: 0x00030010, at 0xfee00000
 cpu1 (AP):  apic id:  1, version: 0x00030010, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc0404000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc040409c.
Intel Pentium detected, installing workaround for F00F bug
VESA: v2.0, 4096k memory, flags:0x1, mode table:0xc0384902 (1000022)
VESA: Matrox Graphics Inc.
netsmb_dev: loaded
md0: Malloc disk
Using $PIR table, 5 entries at 0xc00fdab0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #0 intpin 16 -> irq 2
IOAPIC #0 intpin 17 -> irq 16
IOAPIC #0 intpin 18 -> irq 17
pci0: <PCI bus> on pcib0
isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 ATA controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Matrox MGA 1024SG/1064SG/1164SG graphics accelerator> at 14.0 irq 2
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0x6000-0x60ff mem 0xe1004000-0xe1004fff irq 16 at device 15.0 on pci0
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
bktr0: <BrookTree 878> mem 0xe1005000-0xe1005fff irq 17 at device 16.0 on pci0
iicbb0: <I2C bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
iicbus1: <Philips I2C bus> on iicbb0 master-only
smbus0: <System Management Bus> on bti2c0
smb0: <SMBus general purpose I/O> on smbus0
bktr0: Hauppauge Model 61334 B1  
bktr0: Detected a MSP3410D-B4 at 0x80
bktr0: Hauppauge WinCast/TV, Philips FR1216 PAL FM tuner, msp3400c stereo.
pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 16.1 irq 17
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcdfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x20000 on isa0
sio0: type ST16650A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ed0 at port 0x320-0x33f iomem 0xd8000 irq 11 drq 0 on isa0
ed0: address 00:00:b4:84:ee:69, type NE2000 (16 bit) 
sbc0: <Creative SB16/SB32> at port 0x220-0x22f,0x300-0x301,0x388-0x38b irq 5 drq 0,5 on isa0
pcm0: <SB16 DSP 4.13> on sbc0
ata4: <Generic ESDI/IDE/ATA controller> at port 0x168-0x16f,0x36e-0x36f irq 10 on isa0
joy0: <Generic PnP Joystick> at port 0x200-0x207 on isa0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
SMP: AP CPU #1 Launched!
ad2: 6485MB <Maxtor 90680D4> [13176/16/63] at ata1-master WDMA2
acd0: CDROM <FX400E> at ata0-slave PIO3
afd0: 96MB <IOMEGA ZIP 100 ATAPI> [32/64/96] at ata1-slave PIO0
Waiting 4 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DDYS-T09170N S93E> Fixed Direct Access SCSI-3 device 
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C)
da1 at ahc0 bus 0 target 2 lun 0
da1: <IBM DORS-32160 WA0A> Fixed Direct Access SCSI-2 device 
da1: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da1: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C)