Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.6-RELEASE-p1 #1: Sat Jul  6 14:31:15 JST 2002
    sumitani@server.localdomain:/work4/obj/work4/src-4.6/sys/Server
Timecounter "i8254"  frequency 1193054 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (601.30-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x681  Stepping = 1
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 402653184 (393216K bytes)
avail memory = 387469312 (378388K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  0, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  1, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc03f1000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc03f109c.
Preloaded elf module "vinum.ko" at 0xc03f10ec.
Pentium Pro MTRR support enabled
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
IOAPIC #0 intpin 19 -> irq 2
IOAPIC #0 intpin 18 -> irq 10
IOAPIC #0 intpin 16 -> irq 11
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mach64-GB graphics accelerator> at 0.0 irq 0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <Intel PIIX4 ATA controller> at 7.1
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xef80-0xef9f irq 2 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: Kawatsu Semiconductor MiniHub 4000P, class 9/0, rev 1.00/1.00, addr 2
uhub1: 4 ports with 4 removable, bus powered
intpm0: <Intel 82371AB Power management controller> port 0x440-0x44f irq 9 at device 7.3 on pci0
intpm0: I/O mapped 440
intpm0: intr IRQ 9 enabled revision 0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus general purpose I/O> on smbus0
intpm0: PM I/O mapped 400 
ahc0: <Adaptec 2940 Ultra2 SCSI adapter> port 0xe800-0xe8ff mem 0xfebff000-0xfebfffff irq 10 at device 18.0 on pci0
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xef00-0xef1f mem 0xfea00000-0xfeafffff,0xfc5ff000-0xfc5fffff irq 11 at device 20.0 on pci0
fxp0: Ethernet address 00:90:27:4e:8d:ba
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcd7ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <4 virtual consoles, flags=0x200>
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
Waiting 2 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <SAMSUNG WN34324U (gm031) 0105> Fixed Direct Access SCSI-2 device 
da0: 20.000MB/s transfers (20.000MHz, offset 15)
da0: 4120MB (8438976 512 byte sectors: 255H 63S/T 525C)
da4 at ahc0 bus 0 target 10 lun 0
da4: <IBM DDYS-T18350N S96H> Fixed Direct Access SCSI-3 device 
da4: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da4: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
da1 at ahc0 bus 0 target 4 lun 0
da1: <FUJITSU M2513EL 0020> Removable Optical SCSI-2 device 
da1: 10.000MB/s transfers (10.000MHz, offset 15)
da1: Attempt to query device size failed: NOT READY, Medium not present
WARNING: / was not properly dismounted
da2 at ahc0 bus 0 target 8 lun 0
da2: <IBM DNES-318350W SAH0> Fixed Direct Access SCSI-3 device 
da2: 80.000MB/s transfers (40.000MHz, offset 30, 16bit), Tagged Queueing Enabled
da2: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
da3 at ahc0 bus 0 target 9 lun 0
da3: <IBM DNES-318350W SAH0> Fixed Direct Access SCSI-3 device 
da3: 80.000MB/s transfers (40.000MHz, offset 30, 16bit), Tagged Queueing Enabled
da3: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
cd0 at ahc0 bus 0 target 5 lun 0
cd0: <PLEXTOR CD-ROM PX-40TW 1.01> Removable CD-ROM SCSI-2 device 
cd0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit)
cd0: Attempt to query device size failed: NOT READY, Medium not present