Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.6.2-RELEASE #0: Fri Oct 11 08:28:32 GMT 2002
    root@pc137.tec.esotronic.de:/usr/src/sys/compile/SMP
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (1260.61-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 1073741824 (1048576K bytes)
avail memory = 1039867904 (1015496K bytes)
Programming 16 pins in IOAPIC #0
Programming 16 pins in IOAPIC #1
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  1, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  0, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x000f0011, at 0xfec00000
 io1 (APIC): apic id:  3, version: 0x000f0011, at 0xfec01000
Preloaded elf kernel "kernel" at 0xc04df000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 14 entries at 0xc00fdee0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib1: <ServerWorks host to PCI bridge> on motherboard
pci1: <PCI bus> on pcib1
pcib0: <ServerWorks host to PCI bridge> on motherboard
IOAPIC #1 intpin 4 -> irq 2
IOAPIC #1 intpin 2 -> irq 16
IOAPIC #1 intpin 3 -> irq 17
IOAPIC #1 intpin 17 -> irq 18
pci0: <PCI bus> on pcib0
pci0: <ATI Mach64-GR graphics accelerator> at 2.0 irq 2
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x2400-0x243f mem 0xfc000000-0xfc01ffff,0xfc041000-0xfc041fff irq 16 at device 3.0 on pci0
fxp0: Ethernet address 00:02:b3:51:4e:37
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0x2440-0x247f mem 0xfc020000-0xfc03ffff,0xfc042000-0xfc042fff irq 17 at device 4.0 on pci0
fxp1: Ethernet address 00:02:b3:51:4e:38
inphy1: <i82555 10/100 media interface> on miibus1
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI to ISA bridge (vendor=1166 device=0201)> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks CSB5 ATA100 controller> port 0x2490-0x2493,0x2480-0x248f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xfc043000-0xfc043fff irq 18 at device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib2: <ServerWorks host to PCI bridge> on motherboard
IOAPIC #1 intpin 0 -> irq 19
IOAPIC #1 intpin 1 -> irq 20
IOAPIC #1 intpin 10 -> irq 21
pci2: <PCI bus> on pcib2
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x2800-0x28ff mem 0xfe000000-0xfe000fff irq 19 at device 4.0 on pci2
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x2c00-0x2cff mem 0xfe001000-0xfe001fff irq 20 at device 4.1 on pci2
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
iir0: <Intel Integrated RAID Controller> mem 0xfe400000-0xfe403fff irq 21 at device 9.0 on pci2
pcib3: <ServerWorks host to PCI bridge> on motherboard
pci3: <PCI bus> on pcib3
pcib4: <Host to PCI bridge> on motherboard
pci4: <PCI bus> on pcib4
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff,0xc9800-0xcafff,0xcb000-0xd07ff,0xde000-0xdffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
SMP: AP CPU #1 Launched!
acd0: DVD-ROM <LITEON DVD-ROM LTD-165H> at ata0-master PIO4
Waiting 15 seconds for SCSI devices to settle
pass0 at iir0 bus 0 target 5 lun 0
pass0: <ESG-SHV SCA HSBP M15 0.08> Fixed Processor SCSI-2 device
pass1 at iir0 bus 0 target 6 lun 0
pass1: <ESG-SHV SCA HSBP M15 0.08> Fixed Processor SCSI-2 device
da0 at iir0 bus 1 target 0 lun 0
da0: <IIR Host Drive   #00 > Fixed Direct Access SCSI-2 device
da0: Tagged Queueing Enabled
da0: 67993MB (139251420 512 byte sectors: 255H 63S/T 8668C)
Mounting root from ufs:/dev/da0s1a