Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.6.2-RELEASE #1: Sat Sep  7 03:12:35 JST 2002
    fujimori@ns.fujimori.cache.waseda.ac.jp:/usr/local/src/sys/compile/NS6
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium 4 (2398.97-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf24  Stepping = 4
  Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,<b28>,ACC>
real memory  = 536805376 (524224K bytes)
avail memory = 517558272 (505428K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  0, version: 0x00050014, at 0xfee00000
 cpu1 (AP):  apic id:  1, version: 0x00050014, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00178020, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc04a1000.
md0: Malloc disk
Using $PIR table, 9 entries at 0xc00fdec0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #0 intpin 19 -> irq 2
IOAPIC #0 intpin 17 -> irq 5
IOAPIC #0 intpin 23 -> irq 9
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=8086 device=2532)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <PCI to PCI bridge (vendor=8086 device=2533)> at device 2.0 on pci0
pci2: <PCI bus> on pcib2
pcib3: <PCI to PCI bridge (vendor=8086 device=1360)> at device 31.0 on pci2
IOAPIC #0 intpin 20 -> irq 10
pci3: <PCI bus> on pcib3
pci3: <unknown card> (vendor=0x8086, dev=0x1161) at 0.0
ahc0: <Adaptec 3960D Ultra160 SCSI adapter> port 0x9000-0x90ff mem 0xf5000000-0xf5000fff irq 10 at device 9.0 on pci3
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec 3960D Ultra160 SCSI adapter> port 0x9400-0x94ff mem 0xf5002000-0xf5002fff irq 10 at device 9.1 on pci3
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
pcib4: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
IOAPIC #0 intpin 16 -> irq 11
IOAPIC #0 intpin 18 -> irq 16
pci4: <PCI bus> on pcib4
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xa000-0xa03f mem 0xf8000000-0xf801ffff,0xf8040000-0xf8040fff irq 11 at device 4.0 on pci4
fxp0: Ethernet address 00:d0:68:00:81:cb
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci4: <VGA-compatible display device> at 9.0 irq 5
sym0: <875> port 0xa400-0xa4ff mem 0xf8042000-0xf8042fff,0xf8041000-0xf80410ff irq 16 at device 10.0 on pci4
sym0: Symbios NVRAM, ID 7, Fast-20, SE, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0xf000-0xf00f at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xb000-0xb01f irq 2 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3 irq 5
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xb800-0xb81f irq 9 at device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x8086, dev=0x2445) at 31.5 irq 5
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
Waiting 15 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
SMP: AP CPU #1 Launched!
(probe33:sym0:0:3:0): phase change 6-7 6@1f176b8c resid=4.
sa0 at sym0 bus 0 target 3 lun 0
sa0: <ARCHIVE VIPER 150  21247 -005> Removable Sequential Access SCSI-CCS device
sa0: 3.300MB/s transfers
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DPSS-336950N S96H> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0: 35239MB (72170880 512 byte sectors: 255H 63S/T 4492C)
da1 at ahc1 bus 0 target 1 lun 0
da1: <IBM DPSS-318350N S92A> Fixed Direct Access SCSI-3 device
da1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da1: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
Mounting root from ufs:/dev/da0s1a
cd0 at sym0 bus 0 target 5 lun 0
cd0: <PLEXTOR CD-ROM PX-40TW 1.01> Removable CD-ROM SCSI-2 device
cd0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit)
cd0: Attempt to query device size failed: NOT READY, Medium not present