Copyright (c) 1992-2000 The FreeBSD Project. 
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 
        The Regents of the University of California. All rights reserved. 
FreeBSD 4.2-STABLE #4: Sun Dec 10 22:30:58 EST 2000 
    trev@guard.sentry.org:/usr/src/sys/compile/GUARD 
Timecounter "i8254"  frequency 1193182 Hz 
CPU: Pentium/P55C (199.31-MHz 586-class CPU) 
  Origin = "GenuineIntel"  Id = 0x543  Stepping = 3 
  Features=0x8003bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,MMX> 
real memory  = 100663296 (98304K bytes) 
config> q 
avail memory = 94892032 (92668K bytes) 
Programming 24 pins in IOAPIC #0 
IOAPIC #0 intpin 2 -> irq 0 
FreeBSD/SMP: Multiprocessor motherboard 
cpu0 (BSP): apic id:  0, version: 0x00030010, at 0xfee00000 
cpu1 (AP):  apic id:  1, version: 0x00030010, at 0xfee00000 
io0 (APIC): apic id:  2, version: 0x00170011, at 0xfec00000 
Preloaded elf kernel "kernel" at 0xc0301000. 
Preloaded userconfig_script "/boot/kernel.conf" at 0xc030109c. 
Intel Pentium detected, installing workaround for F00F bug 
npx0: <math processor> on motherboard 
npx0: INT 16 interface 
pcib0: <Host to PCI bridge> on motherboard 
pci0: <PCI bus> on pcib0 
isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0 
isa0: <ISA bus> on isab0 
pci0: <Intel PIIX3 ATA controller> at 7.1 
pci0: <Matrox MGA Millennium II 2164W graphics accelerator> at 14.0 irq 16 
de0: <Digital 21040 Ethernet> port 0x6400-0x647f mem 0xe3000000-0xe300007f irq 17 at device 15.0 on pci0 
de0: 21040 [10Mb/s] pass 2.3 
de0: address 00:80:c8:0c:ff:a3 
ahc0: <Adaptec 2940 SCSI adapter> port 0x6800-0x68ff mem 0xe3001000-0xe3001fff irq 19 at device 17.0 on pci0 
aic7870: Single Channel A, SCSI Id=7, 16/255 SCBs 
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 
fdc0: FIFO enabled, 8 bytes threshold 
fd0: <1440-KB 3.5" drive> on fdc0 drive 0 
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 
kbd0 at atkbd0 
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 
sc0: <System console> at flags 0x100 on isa0 
sc0: VGA <16 virtual consoles, flags=0x300> 
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 
sio0: type 16550A 
sio1 at port 0x2f8-0x2ff irq 3 on isa0 
sio1: type 16550A 
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode 
ppc0: FIFO with 16/16/16 bytes threshold 
lpt0: <Printer> on ppbus0 
lpt0: Interrupt-driven port 
ppi0: <Parallel I/O> on ppbus0 
de0: enabling AUI/BNC port 
APIC_IO: Testing 8254 interrupt delivery 
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2 
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0 
Waiting 30 seconds for SCSI devices to settle 
SMP: AP CPU #1 Launched! 
Mounting root from ufs:/dev/da0s1a 
da0 at ahc0 bus 0 target 0 lun 0 
da0: <FUJITSU M2954S-512 0147> Fixed Direct Access SCSI-2 device  
da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled 
da0: 4149MB (8498506 512 byte sectors: 64H 32S/T 4149C) 
cd0 at ahc0 bus 0 target 6 lun 0 
cd0: <TEAC CD-ROM CD-532S 1.0A> Removable CD-ROM SCSI-2 device  
cd0: 10.000MB/s transfers (10.000MHz, offset 15) 
cd0: Attempt to query device size failed: NOT READY, Medium not present