Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT-20031021-JPSNAP #0: Fri Jul 25 09:03:35 CEST 2003 root@taffey.ka.strato.de:/usr/src/sys/i386/compile/SMP2 Preloaded elf kernel "/boot/kernel/kernel" at 0xc0813000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0813244. Calibrating clock(s) ... i8254 clock: 1193197 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 3055481304 Hz CPU: Intel(R) Xeon(TM) CPU 3.06GHz (3055.48-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf25 Stepping = 5 Features=0xbfebfbff Hyperthreading: 2 logical CPUs real memory = 4026507264 (3839 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c29000 - 0x00000000ebc53fff, 3942821888 bytes (962603 pages) avail memory = 3913248768 (3731 MB) Programming 16 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 Programming 16 pins in IOAPIC #1 Programming 16 pins in IOAPIC #2 Programming 16 pins in IOAPIC #3 FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000 cpu1 (AP): apic id: 1, version: 0x00050014, at 0xfee00000 cpu2 (AP): apic id: 6, version: 0x00050014, at 0xfee00000 cpu3 (AP): apic id: 7, version: 0x00050014, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x000f0011, at 0xfec00000 io1 (APIC): apic id: 3, version: 0x000f0011, at 0xfec01000 io2 (APIC): apic id: 4, version: 0x000f0011, at 0xfec02000 io3 (APIC): apic id: 5, version: 0x000f0011, at 0xfec03000 bios32: Found BIOS32 Service Directory header at 0xc00ffee0 bios32: Entry = 0xf0000 (c00f0000) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0x94 Other BIOS signatures found: null: random: mem: Pentium Pro MTRR support enabled SMP: CPU0 bsp_apic_configure(): lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard ACPI-1016: *** Info: There are no GPE blocks defined in the FADT acpi0: Power Button (fixed) ACPI timer looks BAD min = 3, max = 8, width = 5 ACPI timer looks BAD min = 3, max = 9, width = 6 ACPI timer looks BAD min = 3, max = 8, width = 5 ACPI timer looks BAD min = 3, max = 412, width = 409 ACPI timer looks BAD min = 3, max = 8, width = 5 ACPI timer looks BAD min = 3, max = 8, width = 5 ACPI timer looks BAD min = 3, max = 9, width = 6 ACPI timer looks BAD min = 3, max = 9, width = 6 ACPI timer looks BAD min = 3, max = 8, width = 5 ACPI timer looks BAD min = 3, max = 8, width = 5 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00141166) pcibios: BIOS version 2.10 AcpiOsDerivePciId: bus 0 dev 0 func 0 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x920-0x923 on acpi0 acpi_cpu0: on acpi0 acpi_cpu1: on acpi0 acpi_cpu2: on acpi0 acpi_cpu3: on acpi0 acpi_cpu4: on acpi0 acpi_cpu5: on acpi0 acpi_cpu6: on acpi0 acpi_cpu7: on acpi0 acpi_tz0: on acpi0 pcib0: on acpi0 ---- initial configuration ------------------------ \\_SB_.IN16 irq 3: [ 4 5 7 10 11 15] 0.4.0 \\_SB_.IN17 irq 5: [ 4 5 7 10 11 15] 0.4.1 \\_SB_.IUSB irq 7: [ 4 5 7 10 11 15] 0.15.0 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.IN16 irq 3: [ 4 5 7 10 11 15] 0.4.0 \\_SB_.IN17 irq 5: [ 4 5 7 10 11 15] 0.4.1 \\_SB_.IUSB irq 7: [ 4 5 7 10 11 15] 0.15.0 pci0: on pcib0 pci0: physical bus=0 found-> vendor=0x1166, dev=0x0014, revid=0x33 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0014, revid=0x00 bus=0, slot=0, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0014, revid=0x00 bus=0, slot=0, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base f1000000, size 24, enabled map[14]: type 4, range 32, base 00002400, size 8, enabled map[18]: type 1, range 32, base f0ff0000, size 12, enabled found-> vendor=0x1002, dev=0x4752, revid=0x27 bus=0, slot=3, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D1 D2 D3 current D0 IOAPIC #1 intpin 0 -> irq 2 Freeing (NOT implemented) redirected PCI irq 3. map[10]: type 4, range 32, base 00001800, size 8, enabled map[14]: type 1, range 32, base f0fe0000, size 9, enabled found-> vendor=0x0e11, dev=0xb203, revid=0x01 bus=0, slot=4, func=0 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0103, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=2 powerspec 2 supports D0 D3 current D0 IOAPIC #1 intpin 1 -> irq 3 Freeing (NOT implemented) redirected PCI irq 5. map[10]: type 4, range 32, base 00002800, size 8, enabled map[14]: type 1, range 32, base f0fd0000, size 11, enabled map[18]: type 1, range 32, base f0fc0000, size 13, enabled map[1c]: type 1, range 32, base f0f00000, size 19, enabled found-> vendor=0x0e11, dev=0xb204, revid=0x01 bus=0, slot=4, func=2 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0197, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=3 powerspec 2 supports D0 D3 current D0 found-> vendor=0x1166, dev=0x0201, revid=0x93 bus=0, slot=15, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0147, statreg=0x2200, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 000001f0, size 3, enabled map[14]: type 4, range 32, base 000003f4, size 2, enabled map[18]: type 4, range 32, base 00000170, size 3, enabled map[1c]: type 4, range 32, base 00000374, size 2, enabled map[20]: type 4, range 32, base 00002000, size 4, enabled found-> vendor=0x1166, dev=0x0212, revid=0x93 bus=0, slot=15, func=1 class=01-01-8a, hdrtype=0x00, mfdev=1 cmdreg=0x0145, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) IOAPIC #0 intpin 7 -> irq 5 Freeing (NOT implemented) redirected PCI irq 7. map[10]: type 1, range 32, base f0ef0000, size 12, enabled found-> vendor=0x1166, dev=0x0220, revid=0x05 bus=0, slot=15, func=2 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0157, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=a, irq=5 found-> vendor=0x1166, dev=0x0225, revid=0x00 bus=0, slot=15, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0004, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0101, revid=0x05 bus=0, slot=16, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0142, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0101, revid=0x05 bus=0, slot=16, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0142, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0101, revid=0x05 bus=0, slot=17, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0142, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0101, revid=0x05 bus=0, slot=17, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0142, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pci0: at device 3.0 (no driver attached) pci0: at device 4.0 (no driver attached) pci0: at device 4.2 (no driver attached) isab0: at device 15.0 on pci0 isa0: on isab0 atapci0: port 0x2000-0x200f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0 ata0: reset tp1 mask=03 ostat0=50 ostat1=01 ata0-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata0-slave: stat=0x01 err=0x04 lsb=0x00 msb=0x00 ata0: reset tp2 mask=03 stat0=00 stat1=01 devices=0x4 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: simplex device, DMA on primary only ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] ohci0: mem 0xf0ef0000-0xf0ef0fff irq 5 at device 15.2 on pci0 ohci0: (New OHCI DeviceId=0x02201166) usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: on ohci0 usb0: USB revision 1.0 uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered pcib1: on acpi0 ---- initial configuration ------------------------ \\_SB_.IN30 irq 10: [ 4 5 7 10 11 15] 1.3.0 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.IN30 irq 10: [ 4 5 7 10 11 15] 1.3.0 pci1: on pcib1 pci1: physical bus=1 IOAPIC #1 intpin 14 -> irq 7 Freeing (NOT implemented) redirected PCI irq 10. map[10]: type 1, range 64, base f2cc0000, size 18, enabled map[18]: type 4, range 32, base 00003000, size 8, enabled map[1c]: type 3, range 64, base f2bf0000, size 14, enabled found-> vendor=0x0e11, dev=0xb178, revid=0x01 bus=1, slot=3, func=0 class=01-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x47 (2130 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 powerspec 2 supports D0 D1 D3 current D0 MSI supports 2 messages, 64 bit ciss0: port 0x3000-0x30ff mem 0xf2bf0000-0xf2bf3fff,0xf2cc0000-0xf2cfffff irq 7 at device 3.0 on pci1 ciss0: using 256 of 1024 available commands ciss0: 1 logical drive configured ciss0: firmware 2.36 ciss0: 2 SCSI channels ciss0: signature 'CISS' ciss0: valence 1 ciss0: supported I/O methods 0xe ciss0: active I/O method 0x3 ciss0: 4G page base 0x00000000 ciss0: interrupt coalesce delay 1000us ciss0: interrupt coalesce count 16 ciss0: max outstanding commands 1024 ciss0: bus types 0x2 ciss0: server name '' ciss0: heartbeat 0x1000002a ciss0: 1 logical drive ciss0: logical drive 0: RAID 1, 34304MB online pcib2: on acpi0 ---- initial configuration ------------------------ \\_SB_.IN29 irq 11: [ 4 5 7 10 11 15] 2.1.0 \\_SB_.IN31 irq 15: [ 4 5 7 10 11 15] 2.2.0 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.IN29 irq 11: [ 4 5 7 10 11 15] 2.1.0 \\_SB_.IN31 irq 15: [ 4 5 7 10 11 15] 2.2.0 pci2: on pcib2 pci2: physical bus=2 IOAPIC #1 intpin 13 -> irq 10 Freeing (NOT implemented) redirected PCI irq 11. map[10]: type 1, range 64, base f2df0000, size 16, enabled found-> vendor=0x14e4, dev=0x16a7, revid=0x02 bus=2, slot=1, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit IOAPIC #1 intpin 15 -> irq 11 Freeing (NOT implemented) redirected PCI irq 15. map[10]: type 1, range 64, base f2de0000, size 16, enabled found-> vendor=0x14e4, dev=0x16a7, revid=0x02 bus=2, slot=2, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit bge0: mem 0xf2df0000-0xf2dfffff irq 10 at device 1.0 on pci2 bge0: Ethernet address: 00:0b:cd:ef:69:09 miibus0: on bge0 brgphy0: on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: bpf attached bge1: mem 0xf2de0000-0xf2deffff irq 11 at device 2.0 on pci2 bge1: Ethernet address: 00:0b:cd:ef:69:08 miibus1: on bge1 brgphy1: on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge1: bpf attached pcib3: on acpi0 ---- initial configuration ------------------------ \\_SB_.IN20 irq 0: [ 4 5 7 10 11 15] 3.1.0 \\_SB_.IN21 irq 0: [ 4 5 7 10 11 15] 3.1.1 \\_SB_.IN20 irq 0: [ 4 5 7 10 11 15] 3.1.2 \\_SB_.IN21 irq 0: [ 4 5 7 10 11 15] 3.1.3 ---- before setting priority for links ------------ \\_SB_.IN20: interrupts: 4 5 7 10 11 15 penalty: 1440 540 1540 540 540 10540 references: 2 priority: 0 \\_SB_.IN21: interrupts: 4 5 7 10 11 15 penalty: 1440 540 1540 540 540 10540 references: 2 priority: 0 ---- before fixup boot-disabled links ------------- \\_SB_.IN20: interrupts: 4 5 7 10 11 15 penalty: 1440 540 1540 540 540 10540 references: 2 priority: 5046 \\_SB_.IN21: interrupts: 4 5 7 10 11 15 penalty: 1440 540 1540 540 540 10540 references: 2 priority: 5046 ---- after fixup boot-disabled links -------------- \\_SB_.IN20: interrupts: 11 10 5 4 7 15 penalty: 540 540 540 1440 1540 10540 references: 2 priority: 5046 \\_SB_.IN21: interrupts: 11 10 5 4 7 15 penalty: 540 540 540 1440 1540 10540 references: 2 priority: 5046 ---- arbitrated configuration --------------------- \\_SB_.IN20 irq 0: [ 4 5 7 10 11 15] 3.1.0 \\_SB_.IN21 irq 0: [ 4 5 7 10 11 15] 3.1.1 \\_SB_.IN20 irq 0: [ 4 5 7 10 11 15] 3.1.2 \\_SB_.IN21 irq 0: [ 4 5 7 10 11 15] 3.1.3 pci3: on pcib3 pci3: physical bus=3 pcib4: on acpi0 ---- initial configuration ------------------------ \\_SB_.IN24 irq 0: [ 4 5 7 10 11 15] 6.1.0 \\_SB_.IN25 irq 0: [ 4 5 7 10 11 15] 6.1.1 \\_SB_.IN24 irq 0: [ 4 5 7 10 11 15] 6.1.2 \\_SB_.IN25 irq 0: [ 4 5 7 10 11 15] 6.1.3 \\_SB_.IN26 irq 15: [ 4 5 7 10 11 15] 6.2.0 \\_SB_.IN27 irq 11: [ 4 5 7 10 11 15] 6.2.1 \\_SB_.IN26 irq 15: [ 4 5 7 10 11 15] 6.2.2 \\_SB_.IN27 irq 11: [ 4 5 7 10 11 15] 6.2.3 \\_SB_.IN18 irq 7: [ 4 5 7 10 11 15] 6.30.0 ---- before setting priority for links ------------ \\_SB_.IN20: interrupts: 11 10 5 4 7 15 penalty: 1180 980 980 1880 2080 11180 references: 2 priority: 5046 \\_SB_.IN21: interrupts: 11 10 5 4 7 15 penalty: 1180 980 980 1880 2080 11180 references: 2 priority: 5046 \\_SB_.IN24: interrupts: 4 5 7 10 11 15 penalty: 1880 980 2080 980 1180 11180 references: 2 priority: 0 \\_SB_.IN25: interrupts: 4 5 7 10 11 15 penalty: 1880 980 2080 980 1180 11180 references: 2 priority: 0 ---- before fixup boot-disabled links ------------- \\_SB_.IN20: interrupts: 11 10 5 4 7 15 penalty: 1180 980 980 1880 2080 11180 references: 2 priority: 6093 \\_SB_.IN21: interrupts: 11 10 5 4 7 15 penalty: 1180 980 980 1880 2080 11180 references: 2 priority: 6093 \\_SB_.IN24: interrupts: 4 5 7 10 11 15 penalty: 1880 980 2080 980 1180 11180 references: 2 priority: 6093 \\_SB_.IN25: interrupts: 4 5 7 10 11 15 penalty: 1880 980 2080 980 1180 11180 references: 2 priority: 6093 ---- after fixup boot-disabled links -------------- \\_SB_.IN20: interrupts: 5 10 11 4 7 15 penalty: 980 980 1180 1880 2080 11180 references: 2 priority: 6093 \\_SB_.IN21: interrupts: 5 10 11 4 7 15 penalty: 980 980 1180 1880 2080 11180 references: 2 priority: 6093 \\_SB_.IN24: interrupts: 10 5 11 4 7 15 penalty: 980 980 1180 1880 2080 11180 references: 2 priority: 6093 \\_SB_.IN25: interrupts: 10 5 11 4 7 15 penalty: 980 980 1180 1880 2080 11180 references: 2 priority: 6093 ---- arbitrated configuration --------------------- \\_SB_.IN24 irq 0: [ 4 5 7 10 11 15] 6.1.0 \\_SB_.IN25 irq 0: [ 4 5 7 10 11 15] 6.1.1 \\_SB_.IN24 irq 0: [ 4 5 7 10 11 15] 6.1.2 \\_SB_.IN25 irq 0: [ 4 5 7 10 11 15] 6.1.3 \\_SB_.IN26 irq 15: [ 4 5 7 10 11 15] 6.2.0 \\_SB_.IN27 irq 11: [ 4 5 7 10 11 15] 6.2.1 \\_SB_.IN26 irq 15: [ 4 5 7 10 11 15] 6.2.2 \\_SB_.IN27 irq 11: [ 4 5 7 10 11 15] 6.2.3 \\_SB_.IN18 irq 7: [ 4 5 7 10 11 15] 6.30.0 pci6: on pcib4 pci6: physical bus=6 IOAPIC #1 intpin 10 -> irq 15 map[10]: type 1, range 64, base f7fe0000, size 17, enabled map[18]: type 1, range 64, base f7f80000, size 18, enabled map[20]: type 4, range 32, base 00004000, size 6, enabled found-> vendor=0x8086, dev=0x1010, revid=0x01 bus=6, slot=2, func=0 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=a, irq=15 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit IOAPIC #1 intpin 11 -> irq 16 Freeing (NOT implemented) redirected PCI irq 11. map[10]: type 1, range 64, base f7f60000, size 17, enabled map[20]: type 4, range 32, base 00004040, size 6, enabled found-> vendor=0x8086, dev=0x1010, revid=0x01 bus=6, slot=2, func=1 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=b, irq=16 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit IOAPIC #1 intpin 2 -> irq 17 Freeing (NOT implemented) redirected PCI irq 7. map[10]: type 3, range 64, base f6ef0000, size 12, enabled found-> vendor=0x0e11, dev=0xa0f7, revid=0x14 bus=6, slot=30, func=0 class=08-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x0142, statreg=0x0430, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=17 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit em0: port 0x4000-0x403f mem 0xf7f80000-0xf7fbffff,0xf7fe0000-0xf7ffffff irq 15 at device 2.0 on pci6 em0: [MPSAFE] em0: bpf attached em0: Speed:N/A Duplex:N/A em1: port 0x4040-0x407f mem 0xf7f60000-0xf7f7ffff irq 16 at device 2.1 on pci6 em1: [MPSAFE] em1: bpf attached em1: Speed:N/A Duplex:N/A pci6: at device 30.0 (no driver attached) atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: unable to allocate IRQ psmcpnp0 irq 12 on acpi0 psm0: current command byte:0065 psm0: failed to reset the aux device. sio0: irq maps: 0x4401 0x4411 0x4401 0x4401 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A fdc0: port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it sio: sio0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: