Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 7.0-CURRENT #0: Sun Aug 14 20:31:30 EDT 2005 cracauer@wings.cons.org:/usr/src/sys/amd64/compile/WINGS Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80958000. Calibrating clock(s) ... i8254 clock: 1193196 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2004558361 Hz CPU: AMD Opteron(tm) Processor 246 (2004.56-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0xf58 Stepping = 8 Features=0x78bfbff AMD Features=0xe0500800 L1 2MB data TLB: 8 entries, fully associative L1 2MB instruction TLB: 8 entries, fully associative L1 4KB data TLB: 32 entries, fully associative L1 4KB instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 2MB unified TLB: 0 entries, disabled/not present L2 4KB data TLB: 512 entries, 4-way associative L2 4KB instruction TLB: 512 entries, 4-way associative L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative real memory = 4025942016 (3839 MB) Physical memory chunk(s): 0x0000000000001000 - 0x0000000000097fff, 618496 bytes (151 pages) 0x0000000000a55000 - 0x00000000e8eb3fff, 3896897536 bytes (951391 pages) avail memory = 3886645248 (3706 MB) ACPI APIC Table: APIC ID: physical 0, logical 0:0 APIC ID: physical 1, logical 0:1 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 ioapic0: intpin 0 -> ExtINT (edge, high) ioapic0: intpin 1 -> ISA IRQ 1 (edge, high) ioapic0: intpin 2 -> ISA IRQ 2 (edge, high) ioapic0: intpin 3 -> ISA IRQ 3 (edge, high) ioapic0: intpin 4 -> ISA IRQ 4 (edge, high) ioapic0: intpin 5 -> ISA IRQ 5 (edge, high) ioapic0: intpin 6 -> ISA IRQ 6 (edge, high) ioapic0: intpin 7 -> ISA IRQ 7 (edge, high) ioapic0: intpin 8 -> ISA IRQ 8 (edge, high) ioapic0: intpin 9 -> ISA IRQ 9 (edge, high) ioapic0: intpin 10 -> ISA IRQ 10 (edge, high) ioapic0: intpin 11 -> ISA IRQ 11 (edge, high) ioapic0: intpin 12 -> ISA IRQ 12 (edge, high) ioapic0: intpin 13 -> ISA IRQ 13 (edge, high) ioapic0: intpin 14 -> ISA IRQ 14 (edge, high) ioapic0: intpin 15 -> ISA IRQ 15 (edge, high) ioapic0: intpin 16 -> PCI IRQ 16 (level, low) ioapic0: intpin 17 -> PCI IRQ 17 (level, low) ioapic0: intpin 18 -> PCI IRQ 18 (level, low) ioapic0: intpin 19 -> PCI IRQ 19 (level, low) ioapic0: intpin 20 -> PCI IRQ 20 (level, low) ioapic0: intpin 21 -> PCI IRQ 21 (level, low) ioapic0: intpin 22 -> PCI IRQ 22 (level, low) ioapic0: intpin 23 -> PCI IRQ 23 (level, low) MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: high lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high MADT: Forcing active-low polarity and level trigger for SCI ioapic0: intpin 9 polarity: low ioapic0: intpin 9 trigger: level ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00040010 LDR: 0x01000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00000000 err: 0x00010000 pcm: 0x00000400 wlan: <802.11 Link Layer> null: random: nfslock: pseudo-device mem: io: acpi0: on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x800030fc pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 1 [class=060000] [hdr=00] is there (id=74541022) AcpiOsDerivePciId: bus 0 dev 7 func 3 acpi0: Power Button (fixed) acpi0: Sleep Button (fixed) pci_link0: irq 10 on acpi0 pci_link0: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 3 5 10 11 pci_link0: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 3 5 10 11 pci_link0: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 5 10 11 pci_link1: irq 5 on acpi0 pci_link1: Links after initial probe: Index IRQ Rtd Ref IRQs 0 5 N 0 3 5 10 11 pci_link1: Links after initial validation: Index IRQ Rtd Ref IRQs 0 5 N 0 3 5 10 11 pci_link1: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 5 10 11 pci_link2: irq 3 on acpi0 pci_link2: Links after initial probe: Index IRQ Rtd Ref IRQs 0 3 N 0 3 5 10 11 pci_link2: Links after initial validation: Index IRQ Rtd Ref IRQs 0 3 N 0 3 5 10 11 pci_link2: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 5 10 11 pci_link3: irq 11 on acpi0 pci_link3: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 5 10 11 pci_link3: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 5 10 11 pci_link3: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 5 10 11 unknown: I/O range not supported unknown: I/O range not supported ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/1 1/2 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 cpu0: on acpi0 cpu1: on acpi0 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: physical bus=0 found-> vendor=0x1022, dev=0x7454, revid=0x13 bus=0, slot=1, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base f0000000, size 27, enabled found-> vendor=0x1022, dev=0x7455, revid=0x13 bus=0, slot=2, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x63 (2970 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x7460, revid=0x07 bus=0, slot=6, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0017, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x7468, revid=0x05 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x7469, revid=0x03 bus=0, slot=7, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00001460, size 4, enabled found-> vendor=0x1022, dev=0x746b, revid=0x05 bus=0, slot=7, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x746d, revid=0x03 bus=0, slot=7, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 map[10]: type 4, range 32, base 00001000, size 8, enabled map[14]: type 4, range 32, base 00001400, size 6, enabled pcib0: matched entry for 0.7.INTB pcib0: slot 7 INTB hardwired to IRQ 17 found-> vendor=0x1022, dev=0x1100, revid=0x00 bus=0, slot=24, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1101, revid=0x00 bus=0, slot=24, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1102, revid=0x00 bus=0, slot=24, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1103, revid=0x00 bus=0, slot=24, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1100, revid=0x00 bus=0, slot=25, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1101, revid=0x00 bus=0, slot=25, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1102, revid=0x00 bus=0, slot=25, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1103, revid=0x00 bus=0, slot=25, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) agp0: mem 0xf0000000-0xf7ffffff at device 1.0 on pci0 AMD64: 2 Misc. Control unit(s) found. agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xf0000000 agp0: allocating GATT for aperture of size 128M pcib1: at device 2.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xfa000000-0xfa8fffff pcib1: prefetched decode 0xf8000000-0xf9ffffff pci1: on pcib1 pci1: physical bus=1 found-> vendor=0x102b, dev=0x0525, revid=0x04 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x80 (3840 ns), mingnt=0x10 (4000 ns), maxlat=0x20 (8000 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type 3, range 32, base f8000000, size 25, enabled pcib1: (null) requested memory range 0xf8000000-0xf9ffffff: good map[14]: type 1, range 32, base fa800000, size 14, enabled pcib1: (null) requested memory range 0xfa800000-0xfa803fff: good map[18]: type 1, range 32, base fa000000, size 23, enabled pcib1: (null) requested memory range 0xfa000000-0xfa7fffff: good pcib1: matched entry for 1.0.INTA pcib1: slot 0 INTA hardwired to IRQ 16 pci1: at device 0.0 (no driver attached) pcib2: at device 6.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0x2000-0x2fff pcib2: memory decode 0xfa900000-0xfa9fffff pcib2: prefetched decode 0xfff00000-0xfffff pci2: on pcib2 pci2: physical bus=2 found-> vendor=0x1022, dev=0x7464, revid=0x0b bus=2, slot=0, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0017, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=d, irq=11 map[10]: type 1, range 32, base fa900000, size 12, enabled pcib2: (null) requested memory range 0xfa900000-0xfa900fff: good pcib2: matched entry for 2.0.INTD pcib2: slot 0 INTD hardwired to IRQ 19 found-> vendor=0x1022, dev=0x7464, revid=0x0b bus=2, slot=0, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=d, irq=11 map[10]: type 1, range 32, base fa901000, size 12, enabled pcib2: (null) requested memory range 0xfa901000-0xfa901fff: good pcib2: matched entry for 2.0.INTD pcib2: slot 0 INTD hardwired to IRQ 19 found-> vendor=0x105a, dev=0x3373, revid=0x02 bus=2, slot=5, func=0 class=01-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0230, cachelnsz=144 (dwords) lattimer=0xf0 (7200 ns), mingnt=0x04 (1000 ns), maxlat=0x12 (4500 ns) intpin=a, irq=3 powerspec 2 supports D0 D1 D3 current D0 map[10]: type 4, range 32, base 00002400, size 6, enabled pcib2: (null) requested I/O range 0x2400-0x243f: in range map[14]: type 4, range 32, base 00002480, size 4, enabled pcib2: (null) requested I/O range 0x2480-0x248f: in range map[18]: type 4, range 32, base 00002000, size 7, enabled pcib2: (null) requested I/O range 0x2000-0x207f: in range map[1c]: type 1, range 32, base fa902000, size 12, enabled pcib2: (null) requested memory range 0xfa902000-0xfa902fff: good map[20]: type 1, range 32, base fa920000, size 17, enabled pcib2: (null) requested memory range 0xfa920000-0xfa93ffff: good pcib2: matched entry for 2.5.INTA pcib2: slot 5 INTA hardwired to IRQ 18 found-> vendor=0x14e4, dev=0x16a6, revid=0x02 bus=2, slot=6, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0016, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type 1, range 64, base fa910000, size 16, enabled pcib2: (null) requested memory range 0xfa910000-0xfa91ffff: good pcib2: matched entry for 2.6.INTA pcib2: slot 6 INTA hardwired to IRQ 17 found-> vendor=0x1106, dev=0x3044, revid=0x80 bus=2, slot=7, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x20 (8000 ns) intpin=a, irq=11 powerspec 2 supports D0 D2 D3 current D0 map[10]: type 1, range 32, base fa903000, size 11, enabled pcib2: (null) requested memory range 0xfa903000-0xfa9037ff: good map[14]: type 4, range 32, base 00002080, size 7, enabled pcib2: (null) requested I/O range 0x2080-0x20ff: in range pcib2: matched entry for 2.7.INTA pcib2: slot 7 INTA hardwired to IRQ 19 found-> vendor=0x1106, dev=0x3038, revid=0x50 bus=2, slot=8, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0017, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=3 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 00002440, size 5, enabled pcib2: (null) requested I/O range 0x2440-0x245f: in range pcib2: matched entry for 2.8.INTA pcib2: slot 8 INTA hardwired to IRQ 18 found-> vendor=0x1106, dev=0x3038, revid=0x50 bus=2, slot=8, func=1 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0017, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 00002460, size 5, enabled pcib2: (null) requested I/O range 0x2460-0x247f: in range pcib2: matched entry for 2.8.INTB pcib2: slot 8 INTB hardwired to IRQ 16 found-> vendor=0x1106, dev=0x3104, revid=0x51 bus=2, slot=8, func=2 class=0c-03-20, hdrtype=0x00, mfdev=1 cmdreg=0x0017, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=5 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base fa903800, size 8, enabled pcib2: (null) requested memory range 0xfa903800-0xfa9038ff: good pcib2: matched entry for 2.8.INTC pcib2: slot 8 INTC hardwired to IRQ 17 ohci0: mem 0xfa900000-0xfa900fff irq 19 at device 0.0 on pci2 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfa900000 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: on ohci0 usb0: USB revision 1.0 uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: mem 0xfa901000-0xfa901fff irq 19 at device 0.1 on pci2 ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfa901000 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: on ohci1 usb1: USB revision 1.0 uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered atapci0: port 0x2400-0x243f,0x2480-0x248f,0x2000-0x207f mem 0xfa902000-0xfa902fff,0xfa920000-0xfa93ffff irq 18 at device 5.0 on pci2 atapci0: rid 0x20 is memory, requested 4 atapci0: Reserved 0x20000 bytes for rid 0x20 type 3 at 0xfa920000 atapci0: Reserved 0x1000 bytes for rid 0x1c type 3 at 0xfa902000 atapci0: [MPSAFE] ata2: on atapci0 ata2: SATA connect status=00000000 ata2: [MPSAFE] ata3: on atapci0 ata3: SATA connect status=00000000 ata3: [MPSAFE] ata4: on atapci0 ata4: reset tp1 mask=03 ostat0=60 ostat1=70 ata4: stat0=0x20 err=0x20 lsb=0x20 msb=0x20 ata4: stat1=0x30 err=0x30 lsb=0x30 msb=0x30 ata4: reset tp2 stat0=20 stat1=30 devices=0x0 ata4: [MPSAFE] bge0: mem 0xfa910000-0xfa91ffff irq 17 at device 6.0 on pci2 bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfa910000 miibus0: on bge0 brgphy0: on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: bpf attached bge0: Ethernet address: 00:50:45:00:e9:34 bge0: [MPSAFE] fwohci0: port 0x2080-0x20ff mem 0xfa903000-0xfa9037ff irq 19 at device 7.0 on pci2 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xfa903000 fwohci0: [MPSAFE] fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:03:25:21:27:00:01:03 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:03:25:00:01:03 fwe0: bpf attached fwe0: Ethernet address: 02:03:25:00:01:03 fwe0: if_start running deferred for Giant sbp0: on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) uhci0: port 0x2440-0x245f irq 18 at device 8.0 on pci2 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2440 uhci0: [GIANT-LOCKED] usb2: on uhci0 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci1: port 0x2460-0x247f irq 16 at device 8.1 on pci2 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2460 uhci1: [GIANT-LOCKED] usb3: on uhci1 usb3: USB revision 1.0 uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: mem 0xfa903800-0xfa9038ff irq 17 at device 8.2 on pci2 ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfa903800 ehci0: [GIANT-LOCKED] usb4: EHCI version 0.95 usb4: companion controllers, 2 ports each: usb2 usb3 usb4: on ehci0 usb4: USB revision 2.0 uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 4 ports with 4 removable, self powered isab0: at device 7.0 on pci0 isa0: on isab0 atapci1: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1460-0x146f at device 7.1 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1460 ata0: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=10 stat1=00 devices=0x4 ata0: [MPSAFE] ata1: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata1: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=50 stat1=00 devices=0x1 ata1: [MPSAFE] pci0: at device 7.3 (no driver attached) pci0: at device 7.5 (no driver attached) psmcpnp0: irq 12 on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: current command byte:0047 psm0: failed to reset the aux device. fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 73 fdc0: [MPSAFE] fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: port 0x378-0x37f,0x778-0x77f irq 7 drq 1 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: on ppc0 plip0: on ppbus0 plip0: bpf attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete ex_isa_identify() sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff pnpid ORM0000 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0 0 0 0 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 233016 -> 100000 procfs registered linprocfs registered lapic: Divisor 2, Frequency 100227540 hz Timecounter "TSC" frequency 2004558361 Hz quality -100 Timecounters tick every 1.000 msec Linux ELF exec handler installed lo0: bpf attached ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=40 wire acd0: setting PIO4 on AMD 8111 chip acd0: setting UDMA66 on AMD 8111 chip acd0: CDRW drive at ata0 as master acd0: read 8958KB/s (8958KB/s) write 8958KB/s (8958KB/s), 2048KB buffer, UDMA66 acd0: Reads: CDR, CDRW, CDDA stream, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad2: setting PIO4 on AMD 8111 chip ad2: DMA limited to UDMA33, controller found non-ATA66 cable ad2: setting UDMA33 on AMD 8111 chip ad2: 58644MB at ata1-master UDMA33 ad2: 120103200 sectors [119150C/16H/63S] 16 sectors/interrupt 1 depth queue ad2: Adaptec check1 failed ad2: LSI (v3) check1 failed ad2: LSI (v2) check1 failed ad2: FreeBSD check1 failed GEOM: new disk ad2 (probe0:sbp0:0:0:0): error 22 (probe0:sbp0:0:0:0): Unretryable Error (probe1:sbp0:0:1:0): error 22 (probe1:sbp0:0:1:0): Unretryable Error (probe2:sbp0:0:2:0): error 22 (probe2:sbp0:0:2:0): Unretryable Error (probe3:sbp0:0:3:0): error 22 (probe3:sbp0:0:3:0): Unretryable Error (probe4:sbp0:0:4:0): error 22 (probe4:sbp0:0:4:0): Unretryable Error (probe5:sbp0:0:5:0): error 22 (probe5:sbp0:0:5:0): Unretryable Error (probe6:sbp0:0:6:0): error 22 (probe6:sbp0:0:6:0): Unretryable Error ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00040010 LDR: 0x02000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00000000 err: 0x00010000 pcm: 0x00000400 ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0 ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0 ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0 ioapic0: routing intpin 7 (ISA IRQ 7) to cluster 0 ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0 ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0 ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0 ioapic0: routing intpin 16 (PCI IRQ 16) to cluster 0 ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0 ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0 ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0 Trying to mount root from ufs:/dev/ad2s3a WARNING: / was not properly dismounted /: mount pending error: blocks 232 files 4 start_init: trying /sbin/init