Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-RELEASE-p5 #1: Sun Feb 20 13:38:24 HKT 2005 root@roompc.alanbaka.com:/usr/obj/usr/src/sys/MYKERNEL WARNING: debug.mpsafenet forced to 0 as aio requires Giant WARNING: MPSAFE network stack disabled, expect reduced performance. ACPI APIC Table: Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 3.00GHz (3000.12-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf34 Stepping = 4 Features=0xbfebfbff Hyperthreading: 2 logical CPUs real memory = 2146304000 (2046 MB) avail memory = 2094833664 (1997 MB) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 6 cpu3 (AP): APIC ID: 7 ioapic0: Changing APIC ID to 4 ioapic0 irqs 0-23 on motherboard ioapic1 irqs 24-47 on motherboard npx0: [FAST] npx0:

on motherboard
npx0: INT 16 interface
acpi0: on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: on acpi0
cpu1: on acpi0
cpu2: on acpi0
cpu3: on acpi0
acpi_button0: on acpi0
pcib0: port 0xcf8-0xcff on acpi0
pci0: on pcib0
agp0: mem 0xe0000000-0xe7ffffff at device 0.0 on pci0
pcib1: at device 1.0 on pci0
pci1: on pcib1
drm0: port 0x8000-0x80ff mem 0xf1000000-0xf100ffff,0xe8000000-0xefffffff irq 16 at device 0.0 on pci1
info: [drm] AGP at 0xe0000000 128MB
info: [drm] Initialized radeon 1.11.0 20020828 on minor 0
pcib2: at device 3.0 on pci0
pcib2: could not get PCI interrupt routing table for \\_SB_.PCI0.CSAB - AE_NOT_FOUND
pci2: on pcib2
em0: port 0x9000-0x901f mem 0xf3000000-0xf301ffff,0xf3020000-0xf303ffff irq 18 at device 1.0 on pci2
em0: [GIANT-LOCKED]
em0: Ethernet address: 00:11:2f:c7:ac:6e
em0:  Speed:N/A  Duplex:N/A
pcib3: at device 28.0 on pci0
pci3: on pcib3
pcm0: port 0xa000-0xa03f irq 25 at device 3.0 on pci3
pcm0: fwohci0: <1394 Open Host Controller Interface> mem 0xf6000000-0xf6003fff,0xf6004000-0xf60047ff irq 26 at device 3.2 on pci3
fwohci0: [GIANT-LOCKED]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:02:3c:01:51:04:83:3f
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: on fwohci0
sbp0: on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
uhci0: port 0xc400-0xc41f irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: NEC product 0x0050, class 9/0, rev 2.00/1.00, addr 2
uhub1: 7 ports with 7 removable, self powered
ugen0: Prolific Technology Inc. USB-Serial Controller, rev 1.10/3.00, addr 3
uhub2: Microsoft product 0x0288, class 9/0, rev 1.10/1.21, addr 4
uhub2: 3 ports with 2 removable, bus powered
ugen1: Microsoft product 0x0289, rev 1.10/1.21, addr 5
uhci1: port 0xc000-0xc01f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: on uhci1
usb1: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4: MCT Corporation. MCT4U, class 9/0, rev 1.00/1.01, addr 2
uhub4: 5 ports with 4 removable, self powered
ubt0: Broadcom Bluetooth USB Dongle, rev 1.10/0.01, addr 3
ubt0: Broadcom Bluetooth USB Dongle, rev 1.10/0.01, addr 3
ubt0: Interface 0 endpoints: interrupt=0x81, bulk-in=0x82, bulk-out=0x2
ubt0: Interface 1 (alt.config 4) endpoints: isoc-in=0x83, isoc-out=0x3; wMaxPacketSize=64; nframes=5, buffer size=320
ulpt0: Canon S800, rev 1.10/1.03, addr 4, iclass 7/1
ulpt0: using bi-directional mode
pci0: at device 29.4 (no driver attached)
pci0: at device 29.5 (no driver attached)
pci0: at device 29.7 (no driver attached)
pcib4: at device 30.0 on pci0
pci4: on pcib4
fwohci1: mem 0xf5020000-0xf5023fff,0xf5024000-0xf50247ff irq 20 at device 3.0 on pci4
fwohci1: [GIANT-LOCKED]
fwohci1: OHCI version 1.10 (ROM=1)
fwohci1: No. of Isochronous channels is 4.
fwohci1: EUI64 00:e0:18:00:00:ac:8b:d0
fwohci1: Phy 1394a available S400, 2 ports.
fwohci1: Link S400, max_rec 2048 bytes.
firewire1: on fwohci1
sbp1: on firewire1
fwohci1: Initiate bus reset
fwohci1: node_id=0xc800ffc2, gen=1, CYCLEMASTER mode
firewire1: 3 nodes, maxhop <= 2, cable IRM = 2 (me)
firewire1: bus manager 2 (me)
atapci0: port 0xb800-0xb87f,0xb400-0xb40f,0xb000-0xb03f mem 0xf5000000-0xf501ffff,0xf5027000-0xf5027fff irq 23 at device 4.0 on pci4
atapci0: failed: rid 0x20 is memory, requested 4
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
ata4: channel #2 on atapci0
ata5: channel #3 on atapci0
pci4: at device 9.0 (no driver attached)
ahc0: port 0xbc00-0xbcff mem 0xf5026000-0xf5026fff irq 22 at device 10.0 on pci4
ahc0: [GIANT-LOCKED]
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
isab0: at device 31.0 on pci0
isa0: on isab0
atapci1: port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci1
ata1: channel #1 on atapci1
ichsmb0: port 0x500-0x51f irq 17 at device 31.3 on pci0
ichsmb0: [GIANT-LOCKED]
smbus0: on ichsmb0
smb0: on smbus0
speaker0: port 0x61 on acpi0
fdc0: port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: port 0x778-0x77b,0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: on ppc0
lpt0: on ppbus0
lpt0: Interrupt-driven port
ppi0: on ppbus0
atkbdc0: port 0x64,0x60 irq 1 on acpi0
atkbd0: irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: