Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.9-RELEASE-p1 #0: Sun Jan 18 10:50:48 HKT 2004
    root@data.alanbaka.com:/tmp/data/build/4.9/src/sys/MYKERNEL_DATA
Timecounter "i8254"  frequency 1193182 Hz
CPU: Intel Pentium III (1002.28-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 536805376 (524224K bytes)
avail memory = 518082560 (505940K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs
 cpu0 (BSP): apic id:  0, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  1, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00170020, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc0420000.
VESA: v3.0, 16384k memory, flags:0x1, mode table:0xc039c697 (1000117)
VESA: 3dfx Interactive, Inc.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 9 entries at 0xc00fded0
apm: Other PM system enabled.
acpi0: <IntelR AWRDACPI> on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_button0: <Power Button> on acpi0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #0 intpin 19 -> irq 2
IOAPIC #0 intpin 17 -> irq 5
IOAPIC #0 intpin 23 -> irq 9
pci0: <PCI bus> on pcib0
agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> mem 0xe0000000-0xe1ffffff at device 0.0 on pci0
pcib1: <Intel 82801BA/BAM (ICH2) PCI-PCI (AGP) bridge> at device 1.0 on pci0
IOAPIC #0 intpin 16 -> irq 10
pci1: <PCI bus> on pcib1
pci1: <3Dfx Voodoo 3 graphics accelerator> at 0.0 irq 10
pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
IOAPIC #0 intpin 18 -> irq 11
pci2: <PCI bus> on pcib2
twe0: <3ware Storage Controller> port 0xa000-0xa00f mem 0xeb000000-0xeb7fffff,0xeb966000-0xeb96600f irq 10 at device 4.0 on pci2
twe0: 4 ports, Firmware FE7X 1.05.00.065, BIOS BE7X 1.08.00.048
fwohci0: <Texas Instruments TSB12LV23> mem 0xeb960000-0xeb963fff,0xeb965000-0xeb9657ff irq 11 at device 6.0 on pci2
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:30:95:23:10:00:8c:be
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP2/SCSI over firewire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc1, gen=1, CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me)
firewire0: bus manager 1 (me)
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.16> port 0xa400-0xa43f mem 0xeb900000-0xeb91ffff,0xeb920000-0xeb93ffff irq 2 at device 7.0 on pci2
em0:  Speed:N/A  Duplex:N/A
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xa800-0xa83f mem 0xeb800000-0xeb8fffff,0xeb964000-0xeb964fff irq 10 at device 9.0 on pci2
fxp0: Ethernet address 00:d0:b7:3b:32:34
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci0: <Promise ATA100 controller> port 0xbc00-0xbc3f,0xb800-0xb803,0xb400-0xb407,0xb000-0xb003,0xac00-0xac07 mem 0xeb940000-0xeb95ffff irq 5 at device 10.0 on pci2
ata2: at 0xac00 on atapci0
ata3: at 0xb400 on atapci0
isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH2 ATA100 controller> port 0xf000-0xf00f at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata1: at 0x170 irq 15 on atapci1
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xd000-0xd01f irq 2 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ichsmb0: <Intel 82801BA (ICH2) SMBus controller> port 0x500-0x50f irq 5 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus general purpose I/O> on smbus0
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xd800-0xd81f irq 9 at device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xca7ff,0xcb000-0xcbfff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
SMP: AP CPU #1 Launched!
ad0: 39266MB <IC35L040AVER07-0> [79780/16/63] at ata0-master UDMA100
twed0: <Unit 0, RAID5, Normal> on twe0
twed0: 353397MB (723757824 sectors)
twe0: command interrupt
firewire0: New S400 device ID:00d04b00e0140478
Mounting root from ufs:/dev/ad0s1a
da0 at sbp0 bus 0 target 0 lun 0
da0: <Oxford S OXFORD IDE Devic 0129> Fixed Simplified Direct Access SCSI-4 device 
da0: 50.000MB/s transfers, Tagged Queueing Enabled
da0: 19077MB (39070080 512 byte sectors: 255H 63S/T 2432C)
em0: Link is up 100 Mbps Full Duplex
vn1: raw partition size != slice size
vn1: start 0, end 127999, size 128000
vn1c: start 0, end 255999, size 256000
vn1: truncating raw partition
vn1: raw partition size != slice size
vn1: start 0, end 127999, size 128000
vn1c: start 0, end 255999, size 256000
vn1: truncating raw partition
drm0: <3dfx Voodoo3 3000> port 0xc000-0xc0ff mem 0xe8000000-0xe9ffffff,0xe4000000-0xe5ffffff irq 10 at device 0.0 on pci1
info: [drm] Initialized tdfx 1.0.0 20010216 on minor 0
module_register: module pci/mga already exists!
linker_file_sysinit "mga.ko" failed to register! 17
twe0: AEN: <twe0: port 1: ATA UDMA downgrade>