Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RELEASE #0: Thu Jan 22 19:04:36 CET 2004
    root@2xP90.BI:/usr/src/sys/compile/2xP90
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium/P54C (99.87-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x525  Stepping = 5
  Features=0x3bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC>
real memory  = 67108864 (65536K bytes)
avail memory = 60907520 (59480K bytes)
Changing APIC ID for IO APIC #0 from 0 to 2 on chip
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  0, version: 0x00030010, at 0xfee00000
 cpu1 (AP):  apic id:  1, version: 0x00030010, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x000f0011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc043a000.
Intel Pentium detected, installing workaround for F00F bug
VESA: v1.2, 2048k memory, flags:0x0, mode table:0xc00c4d8b (c0004d8b)
VESA: S3 Incorporated. Trio64
netsmb_dev: loaded
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82375EB PCI-EISA bridge> at device 2.0 on pci0
eisa0: <EISA bus> on isab0
mainboard0: <CUS0102 (System Board)> on eisa0 slot 0
isa0: <ISA bus> on isab0
ahc0: <Adaptec aic7870 SCSI adapter> irq 0 at device 11.0 on pci0
ahc0: can't allocate register resources
device_probe_and_attach: ahc0 attach returned 12
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xf800-0xf8ff mem 0xffbdf000-0xffbdffff irq 10 at device 13.0 on pci0
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
pci0: <S3 Trio graphics accelerator> at 15.0 irq 11
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcdfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
joy0 at port 0x201 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x20000 on isa0
sio0: type ST16650A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
Waiting 4 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DDRS-39130D DC1B> Fixed Direct Access SCSI-2 device 
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 8715MB (17850000 512 byte sectors: 255H 63S/T 1111C)