Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.7-RELEASE #8: Sat Mar 29 01:38:17 CET 2003
    root@yokohama.geos.net.eu.org:/usr/src/sys/compile/YOKOHAMA
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium/P54C (130.67-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x52c  Stepping = 12
  Features=0x3bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC>
real memory  = 150994944 (147456K bytes)
avail memory = 143249408 (139892K bytes)
Changing APIC ID for IO APIC #0 from 0 to 2 on chip
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  0, version: 0x00030010, at 0xfee00000
 cpu1 (AP):  apic id:  1, version: 0x00030010, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x000f0011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc036b000.
Intel Pentium detected, installing workaround for F00F bug
VESA: v1.2, 2048k memory, flags:0x0, mode table:0xc0302cd4 (1000014)
VESA: Cirrus Logic GD-54xx VGA
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82375EB PCI-EISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
ign0 port 0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 2.0 on pci0
ahc0: <Adaptec 2940 SCSI adapter> port 0xe000-0xe0ff mem 0x89000000-0x89000fff irq 9 at device 13.0 on pci0
aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs
pci0: <Cirrus Logic GD5434 SVGA controller> at 14.0
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xca7ff,0xe4000-0xe7fff on isa0
ep0: <3Com 3C509-Combo EtherLink III> at port 0x300-0x30f irq 11 on isa0
ep0: Ethernet address 00:a0:24:cf:e8:8e
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sbc0: <Creative ViBRA16C> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,5 on isa0
pcm0: <SB16 DSP 4.13> on sbc0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
SMP: AP CPU #1 Launched!
ad0: timeout waiting for interrupt
ad0: enabling readahead cache failed
ad0: 810MB <SAMSUNG PLS-30854A> [1647/16/63] at ata0-master BIOSPIO
ad1: 814MB <Maxtor 7850 AV> [1654/16/63] at ata0-slave BIOSPIO
ad2: 1222MB <QUANTUM FIREBALL_TM1280A> [2484/16/63] at ata1-master BIOSPIO
acd0: CDROM <TOSHIBA CD-ROM XM-5402TA> at ata1-slave BIOSPIO
Waiting 15 seconds for SCSI devices to settle
da0 at ahc0 bus 0 target 0 lun 0
da0: <Quantum VP32210 81HA> Fixed Direct Access SCSI-2 device 
da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da0: 2103MB (4308352 512 byte sectors: 255H 63S/T 268C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <Quantum VP32210 81HA> Fixed Direct Access SCSI-2 device 
da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da1: 2103MB (4308352 512 byte sectors: 255H 63S/T 268C)
da2 at ahc0 bus 0 target 2 lun 0
da2: <QUANTUM XP34550S LXY4> Fixed Direct Access SCSI-2 device 
da2: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da2: 4341MB (8890760 512 byte sectors: 255H 63S/T 553C)
Mounting root from ufs:/dev/ad0s1a