Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.7-RELEASE #0: Sun Oct 20 11:36:51 CEST 2002
    root@bryant.ision-cic.de:/usr/src/sys/compile/SMP
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium/P55C (199.43-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x543  Stepping = 3
  Features=0x8003bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,MMX>
real memory  = 67108864 (65536K bytes)
avail memory = 61923328 (60472K bytes)
Programming 16 pins in IOAPIC #0
EISA INTCONTROL = 000082a0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  0, version: 0x00030010, at 0xfee00000
 cpu1 (AP):  apic id:  1, version: 0x00030010, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x000f0011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc035c000.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82375EB PCI-EISA bridge> at device 1.0 on pci0
eisa0: <EISA bus> on isab0
mainboard0: <SNIfd11 (System Board)> on eisa0 slot 0
isa0: <ISA bus> on isab0
pci0: <Cirrus Logic GD5436 SVGA controller> at 2.0
pci0: <unknown card> (vendor=0x110a, dev=0x0005) at 3.0
pci0: <unknown card> (vendor=0x110a, dev=0x0005) at 3.1
pcib1: <DEC 21050 PCI-PCI bridge> at device 17.0 on pci0
pci1: <PCI bus> on pcib1
de0: <Digital 21040 Ethernet> port 0xe800-0xe87f mem 0xfcfffc00-0xfcfffc7f irq 9 at device 4.0 on pci1
de0: ZNYX ZX314 21040 [10Mb/s] pass 2.4
de0: address 00:c0:95:f0:3a:fc
de0: enabling 10baseT port
de1: <Digital 21040 Ethernet> port 0xe400-0xe47f mem 0xfcfff800-0xfcfff87f irq 7 at device 5.0 on pci1
de1: ZNYX ZX314 21040 [10Mb/s] pass 2.4
de1: address 00:c0:95:f0:3a:fd
de1: enabling 10baseT port
de2: <Digital 21040 Ethernet> port 0xe000-0xe07f mem 0xfcfff400-0xfcfff47f irq 15 at device 6.0 on pci1
de2: ZNYX ZX314 21040 [10Mb/s] pass 2.4
de2: address 00:c0:95:f0:3a:fe
de2: enabling 10baseT port
de3: <Digital 21040 Ethernet> port 0xd800-0xd87f mem 0xfcfff000-0xfcfff07f irq 5 at device 7.0 on pci1
de3: ZNYX ZX314 21040 [10Mb/s] pass 2.4
de3: address 00:c0:95:f0:3a:ff
de3: enabling 10baseT port
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xf800-0xf8ff mem 0xfedff000-0xfedfffff irq 7 at device 18.0 on pci0
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xd0000-0xd5fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
aic0: <Adaptec 6260/6360 SCSI controller> at port 0x340-0x35f irq 11 on isa0
aic0: aic6360, disconnection
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
Waiting 15 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DGVS09Y 03B0> Fixed Direct Access SCSI-3 device 
da0: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da0: 8705MB (17829870 512 byte sectors: 64H 32S/T 8705C)
cd0 at ahc0 bus 0 target 5 lun 0
cd0: <NEC CD-ROM DRIVE:464 1.14> Removable CD-ROM SCSI-2 device 
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present