Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.7-STABLE #2: Fri Oct 11 13:16:50 CEST 2002
    root@gnubbel.hhhr.ision.net:/usr/obj/usr/src/sys/GNUBBEL
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (999.72-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10
  Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory  = 805240832 (786368K bytes)
avail memory = 780070912 (761788K bytes)
Programming 16 pins in IOAPIC #0
Programming 16 pins in IOAPIC #1
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  3, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  0, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  4, version: 0x000f0011, at 0xfec00000
 io1 (APIC): apic id:  5, version: 0x000f0011, at 0xfec01000
Preloaded elf kernel "kernel" at 0xc02e1000.
Pentium Pro MTRR support enabled
Using $PIR table, 268435454 entries at 0xc00fdf10
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
IOAPIC #1 intpin 3 -> irq 2
IOAPIC #1 intpin 2 -> irq 5
pci0: <PCI bus> on pcib0
pci0: <ATI Mach64-GV graphics accelerator> at 2.0 irq 2
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x1400-0x143f mem 0xf9100000-0xf91fffff,0xf9001000-0xf9001fff irq 5 at device 3.0 on pci0
fxp0: Ethernet address 00:d0:b7:b8:3b:b3
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 ATA33 controller> port 0x1440-0x144f,0x374-0x377,0x170-0x177 at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
IOAPIC #1 intpin 0 -> irq 9
IOAPIC #1 intpin 1 -> irq 10
pci1: <PCI bus> on pcib1
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x1800-0x18ff mem 0xfb000000-0xfb000fff irq 9 at device 4.0 on pci1
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x2000-0x20ff mem 0xfb001000-0xfb001fff irq 10 at device 4.1 on pci1
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
orm0: <Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xc97ff,0xc9800-0xcf7ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
SMP: AP CPU #1 Launched!
acd0: CDROM <MATSHITA CR-594> at ata0-master PIO4
Waiting 5 seconds for SCSI devices to settle
pt0 at ahc0 bus 0 target 6 lun 0
pt0: <ESG-SHV SCA HSBP M14 0.03> Fixed Processor SCSI-2 device
pt0: 3.300MB/s transfers
ses0 at ahc0 bus 0 target 6 lun 0
ses0: <ESG-SHV SCA HSBP M14 0.03> Fixed Processor SCSI-2 device
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST318406LC 0108> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <SEAGATE ST318275LC 0001> Fixed Direct Access SCSI-2 device
da1: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da1: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C)
Mounting root from ufs:/dev/da0s1a