Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.4-RC #1: Fri Sep 14 11:13:33 CDT 2001
    bob@yoda.immure.com:/usr/src/sys/compile/YODA
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x652  Stepping = 2
  Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 402640896 (393204K bytes)
avail memory = 387596288 (378512K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  1, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  0, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc03f2000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 9 entries at 0xc00f0d20
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443GX host to PCI bridge> on motherboard
IOAPIC #0 intpin 19 -> irq 2
IOAPIC #0 intpin 17 -> irq 10
IOAPIC #0 intpin 16 -> irq 11
pci0: <PCI bus> on pcib0
pcib2: <Intel 82443GX (440 GX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <Matrox MGA G400 AGP graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> at device 4.1 on pci0
atapci0: Busmastering DMA not supported
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd400-0xd41f irq 2 at device 4.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Timecounter "PIIX"  frequency 3579545 Hz
chip1: <Intel 82371AB Power management controller> port 0xe800-0xe80f at device 4.3 on pci0
ahc0: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0xd000-0xd0ff mem 0xdf000000-0xdf000fff irq 10 at device 6.0 on pci0
aic7896/97: Ultra2 Wide Channel A, SCSI Id=7, 32/255 SCBs
ahc1: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0xb800-0xb8ff mem 0xde800000-0xde800fff irq 10 at device 6.1 on pci0
aic7896/97: Ultra2 Wide Channel B, SCSI Id=7, 32/255 SCBs
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xb400-0xb41f mem 0xde000000-0xde0fffff,0xe1000000-0xe1000fff irq 2 at device 7.0 on pci0
fxp0: Ethernet address 00:e0:18:b0:03:32
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sym0: <875> port 0xb000-0xb0ff mem 0xdd000000-0xdd000fff,0xdd800000-0xdd8000ff irq 10 at device 11.0 on pci0
sym0: Symbios NVRAM, ID 7, Fast-20, SE, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym1: <860> port 0xa800-0xa8ff mem 0xdc800000-0xdc8000ff irq 11 at device 12.0 on pci0
sym1: Symbios NVRAM, ID 7, Fast-20, SE, parity checking
sym1: open drain IRQ line driver
sym1: using LOAD/STORE-based firmware.
pcib1: <Intel 82443GX host to AGP bridge> on motherboard
pci2: <PCI bus> on pcib1
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcd7ff,0xd0000-0xd07ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: failed to get data.
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
Waiting 5 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
(noperiph:sym1:0:-1:-1): SCSI BUS reset delivered.
SMP: AP CPU #1 Launched!
(ahc1:A:1:0): refuses WIDE negotiation.  Using 8bit transfers
(ahc1:A:1:0): refuses synchronous negotiation. Using asynchronous transfers
(ahc1:A:4:0): refuses WIDE negotiation.  Using 8bit transfers
(ahc1:A:1:1): refuses WIDE negotiation.  Using 8bit transfers
(ahc1:A:1:1): refuses synchronous negotiation. Using asynchronous transfers
(ahc1:A:4:1): refuses WIDE negotiation.  Using 8bit transfers
(ahc1:A:1:2): refuses WIDE negotiation.  Using 8bit transfers
(ahc1:A:1:2): refuses synchronous negotiation. Using asynchronous transfers
(ahc1:A:4:2): refuses WIDE negotiation.  Using 8bit transfers
(ahc1:A:1:3): refuses WIDE negotiation.  Using 8bit transfers
(ahc1:A:1:3): refuses synchronous negotiation. Using asynchronous transfers
(ahc1:A:4:3): refuses WIDE negotiation.  Using 8bit transfers
(ahc1:A:1:4): refuses WIDE negotiation.  Using 8bit transfers
(ahc1:A:1:4): refuses synchronous negotiation. Using asynchronous transfers
(ahc1:A:4:4): refuses WIDE negotiation.  Using 8bit transfers
(ahc1:A:1:5): refuses WIDE negotiation.  Using 8bit transfers
(ahc1:A:1:5): refuses synchronous negotiation. Using asynchronous transfers
(ahc1:A:4:5): refuses WIDE negotiation.  Using 8bit transfers
(ahc1:A:1:6): refuses WIDE negotiation.  Using 8bit transfers
(ahc1:A:1:6): refuses synchronous negotiation. Using asynchronous transfers
(ahc1:A:4:6): refuses WIDE negotiation.  Using 8bit transfers
(ahc1:A:1:7): refuses WIDE negotiation.  Using 8bit transfers
(ahc1:A:1:7): refuses synchronous negotiation. Using asynchronous transfers
(ahc1:A:4:7): refuses WIDE negotiation.  Using 8bit transfers
da1 at ahc0 bus 0 target 1 lun 0
da1: <IBM DMVS18V 0100> Fixed Direct Access SCSI-3 device 
da1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da1: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST39102LW 0005> Fixed Direct Access SCSI-2 device 
da0: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C)
Mounting root from ufs:/dev/da0s1a
cd0 at ahc1 bus 0 target 4 lun 0
cd0: <TOSHIBA CD-ROM XM-6401TA 1009> Removable CD-ROM SCSI-2 device 
cd0: 20.000MB/s transfers (20.000MHz, offset 16)
cd0: Attempt to query device size failed: NOT READY, Medium not present
da2 at ahc1 bus 0 target 1 lun 0
da2: <IOMEGA ZIP 100 J.03> Removable Direct Access SCSI-2 device 
da2: 3.300MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present