Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Thu Sep 20 23:31:30 CEST 2001
    root@nabab.fyrou.net:/usr/obj/usr/src/sys/NABAB
Timecounter "i8254"  frequency 1193138 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (1004.47-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 536854528 (524272K bytes)
avail memory = 517640192 (505508K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): apic id:  3, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  0, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00178011, at 0xfec00000
Preloaded elf kernel "/boot/kernel/kernel" at 0xc04b4000.
Pentium Pro MTRR support enabled
VESA: v2.0, 32768k memory, flags:0x1, mode table:0xc040ec02 (1000022)
VESA: ATI RADEON
Using $PIR table, 9 entries at 0xc00f1310
acpi0: <ASUS   CUV4XDLS> on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0
IOAPIC #0 intpin 18 -> irq 2
IOAPIC #0 intpin 17 -> irq 5
IOAPIC #0 intpin 19 -> irq 9
IOAPIC #0 intpin 16 -> irq 10
pci0: <PCI bus> on acpi_pcib0
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xfc000000-0xfdffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xb800-0xb80f at device 4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 2 at device 4.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: vendor 0x04e1 product 0x0201, class 9/0, rev 1.10/1.10, addr 2
uhub1: 4 ports with 4 removable, self powered
ugen0: Hewlett-Packard HP Scanjet 5400C Series, rev 1.10/0.00, addr 3
ugen1: Logitech, Inc. Camera, rev 1.00/1.00, addr 4
uhci1: <VIA 83C572 USB controller> port 0xb000-0xb01f irq 2 at device 4.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xa800-0xa83f mem 0xee000000-0xee0fffff,0xee800000-0xee800fff irq 5 at device 7.0 on pci0
fxp0: Ethernet address 00:e0:18:2f:57:d6
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sym0: <1010-33> port 0xa400-0xa4ff mem 0xed000000-0xed001fff,0xed800000-0xed8003ff irq 9 at device 8.0 on pci0
sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: handling phase mismatch from SCRIPTS.
sym1: <1010-33> port 0xa000-0xa0ff mem 0xec000000-0xec001fff,0xec800000-0xec8003ff irq 10 at device 8.1 on pci0
sym1: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
sym1: open drain IRQ line driver, using on-chip SRAM
sym1: using LOAD/STORE-based firmware.
sym1: handling phase mismatch from SCRIPTS.
tx0: <SMC EtherPower II 10/100> port 0x9800-0x98ff mem 0xeb800000-0xeb800fff irq 9 at device 9.0 on pci0
miibus1: <MII bus> on tx0
qsphy0: <QS6612 10/100 media interface> on miibus1
qsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tx0: address 00:e0:29:44:18:bf, type SMC9432TX
pcm0: <Creative EMU10K1> port 0x9400-0x941f irq 9 at device 13.0 on pci0
atspeaker0 port 0x61 on acpi0
fdc0: <NEC 72065B or clone> port 0x3f7,0x3f2-0x3f5 irq 6 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <2880-KB 3.5" drive (in 1440-KB mode)> on fdc0 drive 0
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
npx0: <math processor> on motherboard
npx0: INT 16 interface
orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xcffff on isa0
fdc1: cannot reserve I/O port range (6 ports)
pmtimer0 on isa0
ppc1: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
IPv6 packet filtering initialized, default to accept, logging limited to 100 packets/entry
IP packet filtering initialized, divert enabled, rule-based forwarding disabled, default to accept, logging limited to 100 packets/entry by default
IP Filter: v3.4.20 initialized.  Default = pass all, Logging = disabled
acpi_cpu: CPU throttling enabled, 16 steps from 100% to 6.2%
acd0: DVD-ROM <CREATIVE DVD-ROM DVD1241E> at ata0-master UDMA33
acd1: CD-RW <PLEXTOR CD-R PX-W1610A> at ata0-slave UDMA33
Waiting 5 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
(noperiph:sym1:0:-1:-1): SCSI BUS reset delivered.
da0 at sym0 bus 0 target 0 lun 0
da0: <IBM DDYS-T36950N S96H> Fixed Direct Access SCSI-3 device 
da0: 160.000MB/s transfers (80.000MHz, offset 62, 16bit), Tagged Queueing Enabled
da0: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C)
Mounting root from ufs:/dev/da0s2a
da1 at sym0 bus 0 target 1 lun 0
da1: <IBM DNES-309170W SA30> Fixed Direct Access SCSI-3 device 
da1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da1: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C)
SMP: AP CPU #1 Launched!
linprocfs registered
/dev/vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: build-570 $
/dev/vmmon: Module vmmon: initialized