Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.2-STABLE #12: Thu Feb  8 15:08:27 CET 2001
    root@hp003:/usr/src/sys/compile/SMP
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium/P54C (165.00-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x52c  Stepping = 12
  Features=0x3bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC>
real memory  = 67108864 (65536K bytes)
avail memory = 62099456 (60644K bytes)
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  0, version: 0x00030010, at 0xfee00000
 cpu1 (AP):  apic id:  2, version: 0x00030010, at 0xfee00000
 io0 (APIC): apic id: 14, version: 0x000f0011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc0311000.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 824?? host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <S3 Trio graphics accelerator> at 12.0 irq 11
isab0: <Intel 82375EB PCI-EISA bridge> at device 14.0 on pci0
eisa0: <EISA bus> on isab0
mainboard0: <INT3190 (System Board)> on eisa0 slot 0
isa0: <ISA bus> on isab0
chip1: <> mem 0xfffffc00-0xffffffff,0xfffffc00-0xffffffff,0xfffffc00-0xffffffff,0xfffffc00-0xffffffff,0xfffffc00-0xffffffff,0xffe7bc00-0xffe7bfff at device 15.0 on pci0
pcib1: <Intel 824?? host to PCI bridge> on motherboard
pci1: <PCI bus> on pcib1
mlx0: <Mylex version 3 RAID interface> port 0xfc80-0xfcff mem 0xffcffc00-0xffcffc7f irq 9 at device 12.0 on pci1
mlx0: DAC960P/PD, 2 channels, firmware 3.51-0-04, 4MB RAM
mlxd0: <Mylex System Drive> on mlx0
mlxd0: 6141MB (12576768 sectors) RAID 0 (online)
ahc0: <Adaptec aic7870 SCSI adapter> port 0xf800-0xf8ff mem 0xffcfe000-0xffcfefff irq 11 at device 13.0 on pci1
ahc0: Host Adapter Bios disabled.  Using default SCSI device parameters
aic7870: Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc1: <Adaptec aic7870 SCSI adapter> port 0xf400-0xf4ff mem 0xffcfd000-0xffcfdfff irq 10 at device 14.0 on pci1
ahc1: Host Adapter Bios disabled.  Using default SCSI device parameters
aic7870: Wide Channel A, SCSI Id=7, 16/255 SCBs
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xfc00-0xfc7f mem 0xffcff800-0xffcff87f irq 15 at device 15.0 on pci1
xl0: Ethernet address: 00:50:da:2c:c0:88
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ep0: <3Com 3C509-Combo EtherLink III> at port 0x340-0x34f irq 5 on isa0
ep0: Ethernet address 00:20:af:c6:b2:3c
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppc1: <Parallel port> at port 0x278-0x27f irq 5 on isa0
ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt1: <Printer> on ppbus1
lpt1: Polled port
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
BRIDGE 010131, have 3 interfaces
-- index 1  type 6 phy 0 addrl 6 addr 00.50.da.2c.c0.88
-- index 2  type 6 phy 0 addrl 6 addr 00.20.af.c6.b2.3c
Waiting 5 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
sa0 at ahc0 bus 0 target 3 lun 0
sa0: <HP C1533A 9503> Removable Sequential Access SCSI-2 device 
sa0: 10.000MB/s transfers (10.000MHz, offset 8)
no devsw (majdev=0 bootdev=0xa0200000)
Mounting root from ufs:/dev/mlxd0s1a
cd0 at ahc0 bus 0 target 5 lun 0
cd0: <TOSHIBA CD-ROM XM-5401TA 3605> Removable CD-ROM SCSI-2 device 
cd0: 4.237MB/s transfers (4.237MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present