Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.3-STABLE #1: Mon Apr 30 21:17:29 CEST 2001
    root@2xPPro200.BI:/usr/obj/usr/src/sys/2xPPro200
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium Pro (199.43-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x619  Stepping = 9
  Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV>
real memory  = 134217728 (131072K bytes)
config> en ed0
config> po ed0 0x320
config> ir ed0 11
config> iom ed0 0xd8000
config> f ed0 0
config> q
avail memory = 126885888 (123912K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  1, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  0, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc039f000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc039f09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #0 intpin 17 -> irq 2
IOAPIC #0 intpin 16 -> irq 5
pci0: <PCI bus> on pcib0
isab0: <Intel 82371SB PCI to ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 ATA controller> port 0xe800-0xe80f at device 1.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Matrox MGA 1024SG/1064SG/1164SG graphics accelerator> at 11.0 irq 2
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xe000-0xe0ff mem 0xe5800000-0xe5800fff irq 5 at device 12.0 on pci0
aic7880: Wide Channel A, SCSI Id=7, 16/255 SCBs
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ed0 at port 0x320-0x33f iomem 0xd8000 irq 11 drq 0 on isa0
ed0: address 00:00:b4:83:3d:fd, type NE2000 (16 bit) 
mcd0: type Mitsumi FX001, version info: F 8
mcd0 at port 0x380-0x383 irq 10 on isa0
mcd0: driver is using old-style compatability shims
sbc0: <ESS ES1868> at port 0x220-0x22f,0x388-0x38b,0x300-0x301 irq 9 drq 1,0 on isa0
pcm0: <ESS 18xx DSP> on sbc0
joy0: <ESS0001 PnP Joystick> at port 0x201 on isa0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
Waiting 4 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/da0s1a
cd0 at ahc0 bus 0 target 1 lun 0
cd0: <IBM CDRM00203\\000\\000\\000\\000\\000!K BZ26> Removable CD-ROM SCSI-2 device 
cd0: 5.000MB/s transfers (5.000MHz, offset 15)
cd0: cd present [313719 x 2048 byte records]
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DDRS-34560W S97B> Fixed Direct Access SCSI-2 device 
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C)