Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.3-RC #24: Fri Apr 13 14:15:19 CEST 2001
    root@klima.physik.uni-mainz.de:/usr/obj/usr/src/sys/KLIMA
Timecounter "i8254"  frequency 1193176 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (803.60-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
  Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory  = 1073725440 (1048560K bytes)
avail memory = 1041018880 (1016620K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  3, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  0, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00178011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc03db000.
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #0 intpin 18 -> irq 2
IOAPIC #0 intpin 19 -> irq 10
IOAPIC #0 intpin 16 -> irq 11
pci0: <PCI bus> on pcib0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <Matrox MGA G200 AGP graphics accelerator> at 0.0 irq 11
isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
pci0: <VIA 85C586 ATA controller> at 4.1
pci0: <VIA 83C572 USB controller> at 4.2 irq 2
pci0: <VIA 83C572 USB controller> at 4.3 irq 2
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xb800-0xb83f mem 0xf1800000-0xf18fffff,0xf2000000-0xf2000fff irq 10 at device 9.0 on pci0
fxp0: Ethernet address 00:d0:b7:06:6e:78
pcib3: <DEC 21154 PCI-PCI bridge> at device 11.0 on pci0
pci2: <PCI bus> on pcib3
pcib4: <DEC 21154 PCI-PCI bridge> at device 0.0 on pci2
IOAPIC #0 intpin 17 -> irq 13
pci3: <PCI bus> on pcib4
amr0: <AMI MegaRAID> mem 0xf4000000-0xf5ffffff irq 13 at device 0.0 on pci3
amr0: <Series 493 40 Logical Drive Firmware> Firmware C158, BIOS 3.11, 32MB RAM
pci2: <unknown card> (vendor=0x1077, dev=0x1216) at 1.0 irq 2
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0x9800-0x98ff mem 0xf0800000-0xf0800fff irq 11 at device 12.0 on pci0
aic7880: Wide Channel A, SCSI Id=7, 16/255 SCBs
pcib1: <Host to PCI bridge> on motherboard
pci4: <PCI bus> on pcib1
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <8 virtual consoles, flags=0x200>
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 flags 0x10 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 drq 1 flags 0x8 on isa0
ppc0: SMC-like chipset (ECP-only) in ECP mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
DUMMYNET initialized (010124)
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, unlimited logging
IPsec: Initialized Security Association Processing.
Waiting 4 seconds for SCSI devices to settle
amrd0: <MegaRAID logical drive> on amr0
amrd0: 43735MB (89569280 sectors) RAID 5 (optimal)
SMP: AP CPU #1 Launched!
sa0 at ahc0 bus 0 target 4 lun 0
sa0: <HP C1533A 9503> Removable Sequential Access SCSI-2 device
sa0: 10.000MB/s transfers (10.000MHz, offset 8)
no devsw (majdev=0 bootdev=0xa0200000)
Mounting root from ufs:/dev/amrd0s1a
cd0 at ahc0 bus 0 target 3 lun 0
cd0: <TEAC CD-ROM CD-532S 1.0A> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present