Copyright (c) 1992-2001 The FreeBSD Project. 
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 
The Regents of the University of California. All rights reserved. 
FreeBSD 4.2-STABLE #3: Mon Mar  5 22:58:23 CST 2001 
    root@mikea.ath.cx:/usr/src/sys/compile/MPFW7 
Timecounter "i8254"  frequency 1193182 Hz 
CPU: Pentium III/Pentium III Xeon/Celeron (868.65-MHz 686-class CPU) 
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6 
  Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE> 
real memory  = 536805376 (524224K bytes) 
avail memory = 517693440 (505560K bytes) 
Programming 24 pins in IOAPIC #0 
IOAPIC #0 intpin 2 -> irq 0 
FreeBSD/SMP: Multiprocessor motherboard 
 cpu0 (BSP): apic id:  0, version: 0x00040011, at 0xfee00000 
 cpu1 (AP):  apic id:  1, version: 0x00040011, at 0xfee00000 
 io0 (APIC): apic id:  2, version: 0x00170011, at 0xfec00000 
Preloaded elf kernel "kernel" at 0xc0480000. 
Pentium Pro MTRR support enabled 
md0: Malloc disk 
npx0: <math processor> on motherboard 
npx0: INT 16 interface 
pcib0: <Host to PCI bridge> on motherboard 
pci0: <PCI bus> on pcib0 
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0 
pci1: <PCI bus> on pcib2 
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0 
isa0: <ISA bus> on isab0 
atapci0: <VIA 82C686 ATA66 controller> port 0x9000-0x900f at device 7.1 on pci0 
ata0: at 0x1f0 irq 14 on atapci0 
ata1: at 0x170 irq 15 on atapci0 
uhci0: <VIA 83C572 USB controller> port 0x9400-0x941f irq 19 at device 7.2 on pci0 
usb0: <VIA 83C572 USB controller> on uhci0 
usb0: USB revision 1.0 
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 
uhub0: 2 ports with 2 removable, self powered 
uhci1: <VIA 83C572 USB controller> port 0x9800-0x981f irq 19 at device 7.3 on pci0 
usb1: <VIA 83C572 USB controller> on uhci1 
usb1: USB revision 1.0 
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 
uhub1: 2 ports with 2 removable, self powered 
pcm0: <VIA VT82C686A AC'97 Audio> port 0xa400-0xa403,0xa000-0xa003,0x9c00-0x9cff irq 18 at device 7.5 on pci0 
atapci1: <Promise ATA100 controller> port 0xbc00-0xbc3f,0xb800-0xb803,0xb400-0xb407,0xb000-0xb003,0xac00-0xac07 mem 0xd8000000-0xd801ffff irq 18 at device 12.0 on pci0 
ata2: at 0xac00 on atapci1 
ata3: at 0xb400 on atapci1 
de0: <Digital 21140 Fast Ethernet> port 0xc000-0xc07f mem 0xd8020000-0xd802007f irq 16 at device 14.0 on pci0 
de0: 21140 [10-100Mb/s] pass 1.1 
de0: address 00:c0:6d:15:00:38 
ed0: <NE2000 PCI Ethernet (ProLAN)> port 0xc400-0xc41f irq 17 at device 15.0 on pci0 
ed0: address 00:20:78:1a:9f:55, type NE2000 (16 bit)  
pci0: <NVidia Riva Ultra Vanta TNT2 graphics accelerator> at 16.0 irq 18 
ahc0: <Adaptec 2940 SCSI adapter> port 0xc800-0xc8ff mem 0xd8021000-0xd8021fff irq 17 at device 18.0 on pci0 
aic7870: Single Channel A, SCSI Id=7, 16/255 SCBs 
pcib1: <Host to PCI bridge> on motherboard 
pci2: <PCI bus> on pcib1 
eisa0: <EISA bus> on motherboard 
eisa0: unknown card @@@2a02 (0x00002a02) at slot 9 
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 
fdc0: FIFO enabled, 8 bytes threshold 
fd0: <1440-KB 3.5" drive> on fdc0 drive 0 
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 
kbd0 at atkbd0 
psm0: failed to get data. 
psm0: <PS/2 Mouse> irq 12 on atkbdc0 
psm0: model Generic PS/2 mouse, device ID 0 
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 
sc0: <System console> at flags 0x100 on isa0 
sc0: VGA <16 virtual consoles, flags=0x300> 
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 
sio0: type 16550A 
sio1 at port 0x2f8-0x2ff irq 3 on isa0 
sio1: type 16550A 
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode 
plip0: <PLIP network interface> on ppbus0 
lpt0: <Printer> on ppbus0 
lpt0: Interrupt-driven port 
ppi0: <Parallel I/O> on ppbus0 
pca0 at port 0x40 on isa0 
APIC_IO: Testing 8254 interrupt delivery 
APIC_IO: routing 8254 via IOAPIC #0 intpin 2 
DUMMYNET initialized (010124) 
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default 
IP Filter: v3.4.8 initialized.  Default = pass all, Logging = enabled 
SMP: AP CPU #1 Launched! 
ad0: 29333MB <WDC WD307AA> [59598/16/63] at ata0-master UDMA66 
ad1: 29196MB <SAMSUNG SV3064D> [59320/16/63] at ata0-slave UDMA66 
acd0: CDROM <Pioneer CD-ROM ATAPI Model DR-744 0102> at ata1-master using WDMA2 
Waiting 15 seconds for SCSI devices to settle 
de0: autosense failed: cable problem? 
sa0 at ahc0 bus 0 target 2 lun 0 
sa0: <HP HP35480A 1109> Removable Sequential Access SCSI-2 device  
sa0: 5.000MB/s transfers (5.000MHz, offset 8) 
Mounting root from ufs:/dev/ad0s1a 
cd0 at ahc0 bus 0 target 5 lun 0 
cd0: <SONY CD-RW  CRX140S 1.0e> Removable CD-ROM SCSI-4 device  
cd0: 10.000MB/s transfers (10.000MHz, offset 15) 
cd0: Attempt to query device size failed: NOT READY, Medium not present 
de0: enabling Full Duplex 100baseTX port 

 
>